Table of Contents
Fascia is the term given to the horizontal board that is fixed along the rafter ends at the eaves, closing the gap between each rafter. Traditionally made of 3/4″ or 1″ thick timber, PVC has in recent years become the material of choice for most contractors and developers due to its maintenance-free appeal.
What size are fascia boards?
Fascia Board Sizes Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
What size wood is used for fascia board?
You construct fascia boards out of 1-by lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight.
What board do you use for fascia board?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
How thick are UPVC fascia boards?
Our fascia boards are made from 18mm thick high quality UPVC. That means they are strong and weather-proof, the ideal long-term protection for your roof.
How do I know my fascia size?
The remaining height of the street side face of the fascia board can be determined by deducting the thickness of the bevel cutoff. Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch.
Can I use 2×4 for fascia board?
Install 1×6-80″ fascia boards to the 2×4 trusses. Install the fascia so the bottom edge of the roof sheathing will rest on the beveled edge. Install 22-1/2″ long 2x4s between the trusses to support the fascia boards where they butt.
What type of wood is best for fascia?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
Should I use treated lumber for my fascia board?
Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.
How much weight can a fascia board hold?
An ice filled gutter can apply about 20 pounds of weight per lineal foot to the fascia board. This weight is usually manageable for the fascia board. However, a twelve foot wide roof for a patio or other addition can apply about 180 pounds per lineal foot to the fascia board.
Can you use 2×6 for fascia?
Around here everyone uses 2×6 fascia and then covers it with aluminum fascia. If you are leaving the fascia as wood to be painted then the finished face board is better to wider. So you could use 2×4 frame work and 5/4 or 1×6 fascia boards.
What is the board behind the fascia called?
Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.
How thick are soffits?
While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.
How thick are plastic soffits?
UPVC Soffit Board Styles These multi-purpose soffit boards are 10mm thick and come in a range of widths from 100mm (4″) to 605mm (23.8″.).
What is the difference between soffits and fascias?
The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside. It creates a smooth appearance to the edge and protects the roof from weather damage. Fascia also provides a point for the gutters and drain pipes to attach to.
How tall should my fascia be?
Eaves tiles The height of the board or fillet above the top of the rafter should equal the combined height of the batten and one thickness of interlocking tiles. This should ensure that the eaves tiles lay in the same plane as all the tiles above them.
Do you install fascia before roof sheathing?
When sheathing a roof, the first step is to snap a line so that the first row goes on straight. But if you snap it at 40 inches, then the sheathing will not project over the subfascia or true fascia. Add an inch and a half for subfascia, strike a line. Add the thickness of the true fascia, 15/16 in., in this case.
How do you attach fascia to roof trusses?
Instructions for How to Attach Fascia Board to Roof Trusses Mark the place closest to the end of the board that aligns with the center of a joist. Use the carpenter’s square and pencil to put a straight line at the mark. Cut the board with a miter saw. Position the board against the trusses and nail it in place.
