Table of Contents
Sheathing Plywood (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.563 in.
What size is 19 32 in OSB?
Compare Similar Oriented Strand Board – OSB Oriented Strand Board (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.578 in. x 47.75 in.
What thickness is 15 32 plywood?
1/2-inch NOMINAL VS. ACTUAL SIZES 1/4-inch 11/32 1/2-inch 15/32 5/8-inch 19/32 3/4-inch 23/32.
What is the thickness of 3/4 inch plywood?
The actual thickness is just like it sounds – the actual thickness of the plywood panels you buy, after sanding. Typically, the actual thickness of plywood is 1/32 inch less than the nominal thickness.Thickness in millimeters. Thickness (inch) Thickness (milimeter) 7/16” 11.1mm 1/2” 12.7mm 5/8” 15.9mm 3/4” 19mm.
What size is 3/4 plywood?
Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in.
What does 19/32 convert to in inches?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Inches fractional decimal 19/32 0.59375 21/32 0.65625 23/32 0.71875.
What is 19 32 on a tape measure?
18/32” reduces to 9/16” and 20/32” reduces to 5/8”, therefore 19/32” is the 1/32 mark between 9/16” and 5/8”.
Why is some plywood measured in 32?
The reason un-sanded plywood, such as sheathing, is described as 15/32-in. thick is to reflect the manufacturer’s tolerance of 1/32 inch, even though in layman’s terms the sheet is equivalent to a 1/2-in. sheet of plywood.
Why is half inch plywood not half?
Plywood is often sold in 1/4“, 1/2“, or 3/4” nominal thicknesses, but the actual thickness is often 1/32” thinner. Because the actual thickness may vary measuring the plywood is the only accurate way to determine its thickness. A 3/4” sheet is actually 23/32” thick. A 1/2” sheet is actually 15/32” thick.
Is OSB stronger than plywood?
OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.
Do they make 5/16 plywood?
Plywood manufacturers use lauan — sometimes called Philippine mahogany — to make a utility-grade plywood for cabinetry and interior woodwork. It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches.
What is the strongest 3/4 plywood?
The answer is marine plywood. It is the strongest and toughest of all plywood on the market. High-quality glues hold the plies in marine plywood together. That makes them structurally sound and resistant to moisture.
What is the actual size of a 4×8 plywood?
Sheathing Plywood (Common: 15/32 in. x 4 ft. x 8 ft.; Actual: 0.438 in. x 48 in.
What are the different thicknesses of plywood?
The standard thicknesses for plywood are 1 ¼, 1 1/8, ¾, 5/8, ½, 3/8, ¼, and 1/8 inches. The corresponding actual thicknesses are 1 ¼, 1 1/8, 23/32, 19/32, 15/32, 11/32, 1/4, and ⅛, respectively.
How thick can you get plywood?
The most common thickness of plywood is 1/2-inch, but plywood thickness can range from 1/8-inch to 3/4 inches.
What size is 7 16 OSB?
Product Specifications Type OSB OSB Type Sheathing Size & Dimension 7/16-in Size & Dimension 4-ft x 9-ft (4×9) Type of Board OSB Plywood, Oriented Strand Board.
What is the decimal for 19 32?
As you can see, in one quick calculation, we’ve converted the fraction 1932 into it’s decimal expression, 0.59375.
What is 31 32 on a tape measure?
INCHES DECIMAL OF AN INCH MILLIMETERS 59/64 .921875 23.415625 15/16 .9375 23.812500 61/64 .953125 24.209375 31/32 .96875 24.606350.
Why are inches divided into sixteenths?
It was a natural progression when one wanted to measure portions of an inch. The most obvious place to start is to divide the inch in half, then each half in half again.
Why is an inch called an inch?
inch, unit of British Imperial and United States Customary measure equal to 1/36 of a yard. The unit derives from the Old English ince, or ynce, which in turn came from the Latin unit uncia, which was “one-twelfth” of a Roman foot, or pes. Since 1959 the inch has been defined officially as 2.54 cm.
What size plywood is best for subfloor?
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.
How many mm is 15 32 inches?
0.4688 11.9063 Inches Metric Fractional Decimal mm 15/32 0.4688 11.9063 . 0.4724 12.0000 31/64 0.4844 12.3031.
What size is a half sheet of plywood?
12mm – Sande Plywood ( 1/2 in. Category x 4 ft. x 8 ft.; Actual: 0.472 in. x 48 in.
What is BC plywood?
BC Plywood is a top quality product with a smooth surface. The BC simply means there’s one B-grade side sanded and smooth, backed by a C-grade side. BC Plywood is ideal for jobs that require a finished sanded product.
What is the thinnest plywood?
The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.
Which plywood is best for flooring?
Interior plywood is ideal for rooms not exposed to moisture, such as bedrooms, and makes a good subfloor for carpeting, tiles, vinyl, engineered wood laminate flooring and hardwood flooring. Exterior plywood is a better choice for bathrooms, kitchens and any other rooms exposed to water and moisture.
Do screws hold better in OSB or plywood?
Group 1 plywood, made from the strongest species of wood such as Southern Yellow Pine, holds screws better than OSB.
Which is cheaper plywood or OSB?
OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.
Why is plywood cheaper than OSB?
Plywood is the more expensive option to build with than OSB. The material tends to be thicker and needs to be made to more exacting standards, which increases costs. A 4×8-foot sheet of construction-grade plywood costs roughly $10 a sheet, while the same size sheet of OSB costs only $6 a sheet.
