Table of Contents
Floors: A 1/4-inch minimum thickness is needed, but thicker panels are also fine. Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.
How thick is backer board for floor tile?
Cement-fiber, or similarly reinforced, backer board comes in standard 1/4 inch and 1/2 inch thicknesses. If you’re installing backer board over an existing subfloor, 1/4 inch is sufficient. If you’re installing backer board in new construction, attaching it directly to floor joists, opt for 1/2 inch sheets.
How thick should Hardie board be for tile?
Before you get started, you should determine if your floor is suited to HardieBacker Cement Board. That means you should have a minimum of ⅝” thick exterior grade plywood or 23/32” thick OSB with minimum exposure 1 classification.
Is cement board needed for floor tile?
Whenever you’re laying tile on a wood subfloor, you need to first install cement backer board. Backer board prevents leaks and water damage that could harm your flooring and the structure of your home.
How thick should cement backer board be?
Cement Board Thickness Cement backer board comes in two standard thicknesses, 1/2 inch and 1/4 inch. The industry standard is to use 1/2-inch-thick backer board on wall tile installations, such as a tub surround.
Can you use 1 2 Hardibacker floors?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition. On existing structures: Ensure subfloor is not damaged. Replace any loose, warped, uneven or damaged sections of floor.
What is the thinnest backer board for tile?
Fiber cement board is available in 1/4-inch and 1/2-inch thicknesses. The 1/4-inch-thick board is typically used on floors and countertops.
Can you use 1/4 inch cement board on floors?
1/4″ USG Durock® cement board is an ideal substrate for floor and countertop ceramic tile installations. The 1/4″ thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials.
Can I just screw down cement board?
Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on the floor. It is important to highlight that screws shall not be installed all the way down to the floor joists.
Can you use 1/2 inch cement board on floors?
Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. Manufacturers also recommend bonding cement board to floors with a 1/4-inch polymer-modified thinset coating.
How thick should tile mortar be?
Most tile installations require a 3/16-inch layer of mortar beneath the tile. A mortar layer 3/16 an inch thick is accomplished by spreading mortar with a 3/8-inch by 3/8-inch square-notched trowel. This thickness is ideal for most tile installations.
What is the minimum thickness for floor tiles?
What should be the minimum floor tile thickness? A decent floor tile is at least 10mm thick, yet any floor tile can be utilized on the wall. The thickness of a tile is influenced by the material used and the manufacturing process used to produce it.
Do I need thinset under cement board?
Using thinset under cement board is a commonly skipped step amongst many contractors. Proper installation would be to follow the manufacturers installation instructions for applying cement board to a subfloor. Thinset is going to create a solid surface under tile and prevent flexing that could lead to cracking.
What do you do with a gap between tub and cement board?
Technically, after the tile is installed over the backer board that gap between it and the tub ledge should be filled with an ASTM C920 sealant (caulking e.g. silicone). Although some say you should have weep holes along this gap so any water behind can weep out into the tub.
How do you install cement board on floor tiles?
Instructions Apply the Mortar Bed. Mix a batch thinset mortar, following the manufacturer’s directions, using a bucket and margin trowel or putty knife. Place the First Cement Board Sheet. Fasten the First Sheet. Install More Sheets. Trim the Last Panel. Apply Joint Tape. Mud the Taped Joints.
What is the difference between backer board and cement board?
Cement backer board is also called cement board, and it’s the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.
Can you durock 1/4 walls?
3 Answers. 1/4″ hardibacker alone is an unsuitable substrate for shower wall tile. If it were attached to properly waterproofed drywall, plywood, or plaster it would be fine. Think about it, one wayward elbow, knee, or hip bump and you may get flexion which would cause the grout (or tile) to crack.
Do you have to tape seams on Hardibacker?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape.
What’s better durock or Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
What thinset do I use for cement board?
An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.
