Table of Contents
As long as you pour in 1/8″ layers, you can go as thick as you like. The reason we recommend this thickness is two-fold: first, it allows the bubbles to escape properly, and second, it avoids any excessive overheating of the resin. So for best results always pour in a 1/8″ layer, and you’re good to go!Feb 6, 2021
What happens if you pour epoxy resin too thick?
If your epoxy pour is too thick, the reaction can create too much heat, resulting in a product that does not cure properly with cracks or excessive bubbles. The rule of thumb is if you can make an imprint with your fingernail in the epoxy you can pour again and the epoxy will chemically bond to the previous layer.
Can you pour epoxy 2 inches thick?
The 2:1 Ratio Deep Pour Resin formula is designed specially for deeper casting. Our Deep Pour Epoxy Resin is not made for coating or thin layers. Deep Pour Resin is made for casting half an inch to 2 inches deep. We recommend pouring a minimum of 1/2 inch depth up to 2 inch depth when working with Deep Pour Resin.
Is there a difference between resin and epoxy?
Epoxy coating resin has a more viscous consistency as compared to casting resin. It dries or cures faster than casting resin. Compared to casting resin, epoxy coating resin has relatively shorter processing times. Epoxy coating is more resistant to mechanical influence as compared to casting resin.
How long should you wait between coats of epoxy?
When using epoxy, it can be a helpful process to add a second layer, but you want to make sure to follow the correct procedures. With most coating epoxies, if you are trying to build up to your desired thickness, it is recommended to pour your second coat once the first coat is tacky to the touch (usually 4-6 hours).
How thick can you pour table top epoxy?
The maximum depth to pour is approximately 1/8”- 1/4″ thick. If depths thicker than 1/8”- 1/4″ are desired, multiple coats are necessary. You must wait at least 4 to 10 hours between coats to allow sufficient curing and cooling.
Why did my resin melt my cup?
You look over and see your epoxy resin smoking or maybe your mixing cup melted. When you mix Part A (resin) and Part B (hardener) together new chemical bonds begin to form causing an epoxy exothermic reaction. Energy is released in the form of heat as the mixture catalyzes.
How long should you wait between resin layers?
Allow your resin to set up 3-6 hours between layers, depending on the weight of what you’re adding to the next layer. Example: if adding heavy metal charms to the layer, let previous layer set up for about 6 hours so the charm doesn’t push down into the layer below.
Should you sand between coats of epoxy?
Sanding will not only get out the imperfection but will also serve to provide some tooth between the first and second layers. It will look very scuffed in the short term but do not worry, once you pour the second coat over top, all of those sanding marks will disappear.
How calculate epoxy pour?
The calculation for determining the amount of epoxy you need is a simple volume calculation. You simply multiple the length of the pour by the depth of the pour by the average width of the pour and then convert to liters.
Why is my resin thick?
Temperature If it’s colder than that, the resin will be thicker and harder to mix, will have more bubbles and will take longer to cure until it’s dry to the touch.
How do you fix ripples in resin?
Get rid of waves and ripples on your Epoxy surface Apply a so-called seal coat, which is used to fill in any voids in the project. Always conclude with a flood coat, as not doing so may lead to an uneven appearance.
What happens if you overheat resin?
If your resin overheats and smokes, you do not want to put it into a plastic or cardboard container. These can also leak or worse — catch fire. Do not throw the hot resin in your trash! The reaction is still occurring and can melt your trash can or start a fire.
Can epoxy resin be poured in layers?
Can I Apply Multiple Coats Of Epoxy Resin? Yes, you can apply a second coat of resin if you need to fix a mistake or a surface imperfection. You can also pour multiple layers if you need to cover areas of high relief, if you’re pouring into a mold or if you simply like the look of a thicker coat.
Why did my resin turn yellow?
Epoxy resin turns a yellow hue due to exposure to a myriad of elements. High temperatures, excessive amounts of water, and UV light can all cause the epoxy to change from clear to yellow in tint. Epoxy hardeners can also experience a yellowing discoloration that compounds the epoxy’s off-color issues.
What is considered a deep pour epoxy?
With the ability to pour the resin between 2-4 inches deep you are guaranteed a solid finish that won’t warp when exposed to heat or moisture. The depth of the pour also protects it from breakage, and guarantees a solid, non-flex shape.
Why is Bond deep pour epoxy?
Why is pouring epoxy 2” thick important? Because using a deep casting epoxy that is specially formulated for the woodworking industry, will save you money, time and effort! There’s no need to pour 1/2”, 1/4” or less just to wait 24 hours for it to cure enough to add another layer of epoxy.
Can I use deep pour epoxy for table top?
You want to avoid using a coating epoxy (i.e. table top epoxy) for deep pours, such as river tables or encapsulating objects, because it will take many applications to build up the thickness you will need, which will take a lot of time. Deep Pour Resins are slower to cure, therefore, allowing for a thicker “deep” pour.
What is the best epoxy resin for deep pores?
MAS Deep Pour Epoxy Resin System is the best epoxy for deep pour. It features a 100% solid, two-component, three to one by volume mix ratio formulated for deep pour casting, encapsulating and molding applications.
