Table of Contents
NOTE: Standard boards are often called a 5/4 board when referring to traditional lumber, which means the actual thickness is typically somewhere between 1” and 1 ¼”. Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”.
What is the actual thickness of a 5 4 deck board?
Hardwood Lumber Dimensions Nominal Size Rough Size Actual Size: Surfaced 2 Sides 5/4 inch 1 1/4 inch 1 1/16 inch (27 mm) 6/4 inch 1 1/2 inch 1 5/16 inch (33 mm) 8/4 inch 2 inches 1 3/4 inch (44 mm) 12/4 inch 3 inches 2 3/4 inch (70 mm).
How thick are 1×6 deck boards?
Dimensional Lumber Nominal Size Actual Size 1×6 3/4″ × 5-1/2″ 1×8 3/4″ × 7-1/4″ 1×10 3/4″ × 9-1/4″ 1×12 3/4″ × 11-1/4″.
How thick should patio decking be?
The most commonly used thickness for deck construction is 1-1/4”. But you can also get boards 2” thick, while there are boards only ¾” thick. It depends on the material, how flexible it is, and its hardness rate.
What size boards are best for decking?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
How thick is a five quarter board?
The Actual Size of 5/4 Lumber A board foot is roughly equivalent to 144 cubic inches. However, hardwoods can also be sold in quarters, and ¼ inch of thickness is equivalent to one quarter. Following these rules, a 5/4 board is 1¼ inches thick. Pro Tip: The thickness of a hardwood board is measured before surfacing!.
How thick is a treated deck board?
CHOOSING THE RIGHT DECKING BOARD THICKNESS Decking Type Actual Thickness (inches) Suggested On Center Joist Spacing (inches) Tropical Hardwoods 1x 13/16” 16” Thermally-Modified 5/4 1” 16” Pressure Treated Pine 5/4 1” 16” Western Red Cedar 5/4 1” 16”.
Can you build a deck with 1×6?
Width of material: We recommend only 1×4, 5/4×4 or narrower boards. Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
Should I use deck boards or 2×6?
2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.
Can you use fence boards as decking?
When it comes to extending space in your home, building a deck is one of your top options. What you want to go for is comfort and space that blends well with your home’s aesthetic. If you’ve got strong fence panels that can double as deck panels, these will be a cost effective way to build a deck space.
Should deck joists be 2×6 or 2×8?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.
Can you use 2×10 for deck boards?
Editor’s Comment’s: There is certainly no problem using the 2x10s for any of the structural framing of the deck. Using 2×10 treated lumber for decking is another matter entirely.
Can I use 2×4 for deck joists?
The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.
Is 4×2 OK for decking?
4×2 is not strong enough to support any weight on that length. Thank you for your reply. there will be post half way at 1.5m intervals. Zero experience in decking or and handy work but want to lay some decking on our garden.
What is the best wood to use for a deck?
Overall, our experts at Patio Productions recommend Cedar or Redwood as the best wood choice for outdoor decks. If you’re looking for a cheaper option, pressure treated wood is your next best option.
What is the best timber to use for decking?
Hardwood Species Ironbark is the most durable hardwood for decking and offers longevity. It is extremely fire, termite and rot resistant. Spotted Gum is widely used for decking on account of its durability and strength. Yellow and red stringybark are durable enough for outdoor use.
How thick is a 4×4?
According to the NHLA rules, 13/16″ is the standard acceptable thickness of surfaced 4/4 lumber.
What is a standard deck board size?
What Is the Standard Deck Board Size? Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
How thick is a 2×4 board?
A piece of surfaced (sanded smooth) 2×4 lumber actually measures 1½ inches thick and 3½ inches wide. In rough-cut condition, a 2×4 is slightly less than 2 inches thick and approximately 4 inches wide. When wood is milled from a rough to a smooth surface, it loses about ¼-inch from each of its four sides.
Is pressure treated wood thicker?
Most pressure-treated lumber is made from southern yellow pine, which is a relatively heavy wood, so pressure-treated wood does tend to be heavier than most other lumber because of this alone.
Can you use 1 inch boards for a deck?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface.
Should I use 5’4 or 2×6 deck boards?
For those looking for a distinct wood decking look, 5/4 decking is a good choice at an economical price. For those looking for a more robust, bulkier looking decking, 2×6 decking is a good pick with a square profile.
