Table of Contents
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The coagulant-source water mixture is then slowly stirred in a process known as flocculation.
How does coagulation and flocculation work?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
How does coagulation work in eggs?
When it is heated the runny yolk and white (albumen – which is the major source of protein) turn solid. The proteins in the egg start to thicken, a process known as coagulation. Egg whites coagulate at 60°C, egg yolks 65°C, with full coagulation occurring at 70°C. This process also happens when you cook meat.
What do coagulation tests indicate?
Coagulation tests measure your blood’s ability to clot, and how long it takes to clot. Testing can help your doctor assess your risk of excessive bleeding or developing clots (thrombosis) somewhere in your blood vessels. Coagulation tests are similar to most blood tests.
What is the most commonly used coagulant?
1. Alum (aluminum sulfate), Al2(SO4)3. Still, the most common coagulant in the United States, it is often used in conjunction with cationic polymers.
What is the process of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What does coagulation mean?
Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
What is an example of flocculation?
Flocculation: Particles that aggregate by the use of polymers that binds them together. They are typically used for treatment of wastewater containing colloids (suspended particles) and metal ions. But the phenomena are also well-known from everyday life – especially coagulation. A good example is sour milk.
How does coagulation work in water treatment?
These chemicals are called coagulants, and have a positive charge. The positive charge of the coagulant neutralizes the negative charge of dissolved and suspended particles in the water. When this reaction occurs, the particles bind together, or coagulate (this process is sometimes also called flocculation).
What is difference between alum and iron floc?
Coagulation process is important in water treatment. It is a common understanding that alum is more efficient and cheaper as compared to ferric chloride. I have used these two coagulants for the treatment of Flour Mill Wastewater. Ferric Chloride is way more superior than alum.
Which one is a good coagulant?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
What is the principle of coagulation?
Coagulation and flocculation are related terms describing the process of preparing colloidal materials for removing by sedimentation. Coagulation is the process used to reduce the energy forces present around particles that tend to keep them from joining together to form a larger mass.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
Why alum is used in wastewater treatment?
Iron free Aluminum Sulfate (Alum) is most widely used in municipal drinking water and wastewater treatment systems. In potable water applications, alum functions as an excellent primary coagulant. Through charge neutralization and flocculation in raw water, alum removes: Turbidity.
Why is flocculation important?
Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment. Flocculation expedites sedimentation and ensures efficient solid/liquid separation.
How the coagulant works in jar test?
The jar test involves exposing same volume samples of the water to be treated to different doses of the coagulant and then simultaneously mixing the samples at a constant rapid mixing time. The microfloc formed after coagulation further undergoes flocculation and is allowed to settle.
What is coagulation in food?
Coagulation is defined as the transformation of proteins from a liquid state to a solid form. Once proteins are coagulated, they cannot be returned to their liquid state.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
