Table of Contents
Deck stair railing should stand at least 34 inches high, measuring vertically from the nose of the stair tread to the top of the rail. The IRC specifies that deck stair railing should measure between 34 and 38 inches high, so homeowners may wish to use railing that is even higher than 34 inches for their deck stairs.
How tall is a normal deck railing?
Installing deck railing is easy if you use an anchored handrail system. Standard rail height is 36 to 42 inches; posts will need to be 10 inches longer.
How tall should a railing be?
Handrails should be no less than 34 inches above the stair or ramp and no more than 38 inches above. If you are working with alternating tread devices or ship ladders, you should measure above the tread nosings. The handrail should be between 30-34 inches above.
What is code for deck railing posts?
U.S. building code requires support posts for the rail structure to be no further apart than 6 feet on a deck with 4×4′ deck rail posts and no more than 8 feet apart for decks with 6×6′ deck rail posts. Posts should be no further apart than 5.5 feet on stairs.
What is the maximum height of a deck railing?
All decks greater than 30″ above grade must have a guardrail. If you choose to install a guardrail on a deck lower than 30″, you must still meet code requirements. Decks attached to single-family detached homes are regulated under the rules of the International Residential Code (IRC).
How tall should a second story deck railing be?
Guard rails on second story decks ordinarily should not exceed a height of 42 inches or the minimum height required by local building codes, whichever is greater.
What is the maximum height of a deck without railing?
He’d made a point of building his deck so as to stay under the 30-inch requirement–which is the maximum deck height you can have without a railing.
How high is an outdoor handrail?
Most building codes require handrails for exterior stairs to be between 34 inches and 38 inches above the stair nosings. This means that a handrail’s height is measured from the top of the stair treads, or horizontal stepping members.
Can you notch a 4×4 deck railing post?
Say “No” to notching pressure-treated deck posts. We want you to build an outdoor railing system that you, your family and guests can enjoy without worrying about safety issues. In order to do so, you need to know this building shortcut is not advisable, and we recommend avoiding it at all costs.
Can I use 4×4 posts for my deck?
Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.
How high is a 2nd story balcony?
Balconies that extend from the second or third floor of a home are built at the floor height where they are attached. This height is usually somewhere between 10 and 13 feet for a second floor and 20 to 26 feet for a third floor.
Does my deck need a railing?
If your deck is below 30 inches, a railing is not required. With that said, if you choose to build a deck, even if it is only 24 inches off the ground, that is still high enough that even an adult could injure themselves. When you take your kids and pets into account, the risk is even higher.
Do deck stairs need railings on both sides?
Do I Need Handrails On Both Sides of Deck Stairs? Nope. You don’t need a handrail on both sides, but you may need a railing if your deck is higher than 30″. Many contractors construct a combo handrail and stair rail system, installed on both sides, to cover all safety requirements.
Can a 2×4 be used as a handrail?
According to the IRC (2018), you can use a 2×4 to make a handrail, but you must cut finger recesses along both sides of the board and position the lumber lengthwise on its end. Using a 2×4 as a handrail laid vertically is not allowed. Porch and deck guardrails made from 2x4s laid horizontally are permitted.
Can balusters be used in place of posts?
T/F: Balusters can be used in place of posts if there is adequate infill between them. T/F: End-grains of vertical posts and balusters should be cut level. Deck planking segments should bear on a minimum of _____ joists. T/F: Deck planking should be laid together as tightly as possible.
How can I make my porch post taller?
Doweling is another way to add shear strength. Post caps and metal plates are another way to lengthen posts. Add a wooden sleeve overlay to any of these methods, and the post should be strong enough to do its job.
How do you tie 2 4×4 posts together?
To connect 2 4x4s use a half-lap joint secured with construction adhesive, two steel plates, and four to six 1/2″ or 5/8” through bolts. Posts that support roofs or platforms should lap between 20” and 24”, other structures should connect for 6” to 10” along the centerline.
Should deck joists be 2×6 or 2×8?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.
Can a 4×6 be used as a deck post?
While there may be a handful of circumstances that only require the minimum 4×4 deck post, you will more than likely want to choose a 6×6 post for the deck. It provides more stability for larger decks, the ability to hold a heavier load, and more room for notching.
Do deck blocks sink?
The deck blocks can sink if the soil under them erodes for some reason or the weight is unevenly distributed. That’s why it’s a good idea to use more than less.
