Table of Contents
If you have been shopping for a nightstand, the average height is between 24 and 28 inches which match the traditional height of a bed which is 25 inches from the floor to the mattress.
What height should a bedside table be?
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
What is the average size of a bedside table?
An average nightstand measures around 20″ wide and 20″ deep. The height of the nightstand should be equal — or close to — the height of your bed frame and mattress so that the pieces align properly.
Should bedside tables be same height as bed?
As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.
Can a nightstand be shorter than the bed?
Can nightstands be different heights? They absolutely can be different heights! Nightstand sellers need to be able to accommodate a variety of bed heights. The average height of a nightstand is 24”-28” inches, but they can be over 30”.
Can a nightstand be lower than the bed?
RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Ideally, your nightstand will be around the exact same height as the top of your mattress so that you can easily access it.
What is the average dresser height?
A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep. However, these can vary and you should choose an option that works best in your bedroom.
What is a standard size table?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.Standard Dining Table Sizes. Seats Length 4-6 68-72″ 6-8 72-80″ 8-10 80-92″ 10-12 92-110″.
Should you have 2 bedside tables?
You really need two bedside tables if you want to balance the look and aesthetics of your room. A single bedside table can provide focus and accent to a room. Whereas two bedside tables that are of different styles can add a unique look to a bedroom.
How can I make my nightstand taller?
Some of the ways to raise your nightstand include: Add something on top to make your nightstand higher. Use furniture risers on the bottom of your nightstand. Use a piece of furniture to raise the nightstand. Pay a carpenter to raise it however you like.
Should your bedside table be higher or lower than your bed?
The ideal height for a nightstand or bedside table is roughly even with the top of the mattress, i.e.; the sleeping surface (see below). Give or take a few inches, you want the top of the table to be level with the mattress, making it easy for you to reach and creating a clean sightline across the bed.
How high is an end table?
“End tables for living rooms are usually 25 to 30 inches tall, but the arm height of most sofas is 25 inches, which means most end tables are taller than the sofa arm,” he said.
How far should a nightstand be from the wall?
Your bedside table should be within reach of your bed. Spacing in a room is important, so it should be at least one or two inches from the side of your bed, level with your mattress, or a few inches taller. However, it can be further depending on your reach and your personal design preferences.
What is the purpose of a nightstand?
They are often used to support items that might be useful during the night, such as a table lamp, alarm clock, reading matter, cell phone, eyeglasses, tissues, sex toys, a drink, or medication.
How big is a small nightstand?
Small Nightstand Dimensions Low-profile nightstands usually have a height of 20 inches or 50.8 centimeters, and they can be 30 to 35 inches wide or 76.2 to 88.9 centimeters. They have a depth of 17 inches or 43.2 centimeters. This depth size is perfect, especially for a lower bed.
How high is a chest of drawers?
How big are dressers? Dressers come in a large range of sizes to meet varied storage demands, but dressers commonly have overall depths between 18”-24” | (46-61 cm), heights between 30”-50” (76-127 cm), and widths between 30”-74” (76-188 cm).
What is the standard height of a drawer?
Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less. Standard heights are 5-inches, 7.5-inches, 10-inches and 12-inches.
How high is a bedroom dresser?
The standard dresser height is usually between 30 and 36 inches.
How tall is a table?
Standard table height is usually between 28 inches and 30 inches.
How long is a 10 seater table?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
What size is a 10 seater table?
Dining Table Size Guide Size of Dining Table Length Width 4 seater dining table 75cm – 90cm 75cm – 90cm 6 seater dining table 118cm – 140cm 75cm – 90cm 8 seater dining table 150cm – 220cm 75cm – 90cm 10 seater dining table 180cm – 280cm 90cm – 100cm.
