Table of Contents
Shower Curtain Rod Height A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.
What size do shower curtains come in?
Across the board you’ll find three options when it comes to standard shower curtain sizes: 70 x 70 inches. 70 x 72 inches. 72 x 72 inches.
How tall is a tall shower curtain?
Since most shower curtains are 72 inches long, this means that you should hang the rod 75 to 77 inches high, depending on the size of the rings or hooks. This is high enough to keep the curtain’s tail off the floor but low enough to allow it to do its job.
Do shower curtains come in different heights?
There are 3 standard shower curtain sizes, and they are 70 x 70 inches, 70 x 72 inches, and 72 x 72 inches. One of these 3 sizes will work for the showers found in most homes. However, there are exceptions, and you may need a different size if you have an oversized shower, stall shower, or a curved curtain rod.
How long should a shower curtain be for a walk in shower?
For shower stalls and walk-in showers, you will need shower curtains that are 54×72 inches or 54×78 inches in size. Long curtains are a good fit for these types of showers to keep the water from splashing outside.
How long is a long shower curtain?
An extra long shower curtain most often measures 70″ by 84″. This is also the same measurement for an extra tall shower curtain. Other sizes for an extra long are 72″ by 84″. Extra long shower liners can measure 144″ by 72″, which provide more material to keep water from going where its not wanted.
How tall is a shower?
While standard showers typically range between 72 and 80 inches tall, Bestbath’s extra tall showers are built up to 97 inches. Those extra inches mean less sheetrock above the shower to clean, maintain and check for mold.
How far should a curtain hang from the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
What is the average size of a bathtub shower curtain?
In theory, most shower stall curtains are about 54 inches wide, and they are around 72 inches wide for typical bathtubs. The standard shower curtain height is around 72 inches. However, like most theories, don’t trust those figures blindly because designer curtains can be up to 86 inches wide and 108 inches long.
What is the shortest shower curtain size?
► STANDARD MEASUREMENT: 66″ shorter shower curtain fits for your tub.
What is the average size of a shower?
The standard shower size is 36 x 36 inches to comply with ADA accessibility requirements. You won’t find showers much smaller than that, since the International Residential Code sets the minimum shower size at 30 x 30 inches.
Do shower curtains need to touch the floor?
No, your shower curtain is not supposed to touch the floor. The simple reason for this is it will help prevent the bottom of the curtain from collecting too much moisture and dirt. Therefore, leave at least two inches of space between the curtain hem and the bathroom floor.
Can shower curtains be used with walk-in showers?
Yes, you can have a shower curtain in a walk-in shower. Shower curtains are one of the easiest ways to decorate a bathroom. So, if you want to update your walk-in shower without spending a lot of cash, adding a shower curtain is a great way to uplift its aesthetic.
How do you keep a shower curtain inside a walk-in shower?
No matter what causes your shower curtain to fly in at you, there are a couple of remedies to keep it where it needs to be. Buy a weighted curtain. Upgrade your curtain liner. Install a curved shower curtain rod. Grab a suction cup and binder clip. Try magnets.
What is the average length of a shower curtain liner?
70”W x 72” Liner Size Dimensions Standard 70”W x 72”H Shower Stall 54”W x 78”H Extra Tall 70”W x 84”H Floor to Ceiling 72”W x 96”H.
What are standard lengths for curtains?
A wide variety of ready-to-hang options come in standard curtain lengths that fit many rooms. Options typically include 63-inch curtains, 84-inch curtains, 96-inch curtains and 108-inch curtains.
How tall are walk in shower walls?
Shower tiles should generally be approximately six feet and two inches high in the shower. This height covers the minimum of three-fourths of the shower to keep water flowing into the drain and not seeping into the walls.
How tall are walk in showers?
The average walk-in shower in the U.S. measures 60″ x 30″, though size options can vary widely, typically up to 60″ x 42″ for a rectangular shower and 42″ x 42″ for a square one.What is the average walk-in shower size? Common Dimensions Average walk-in shower size for larger bathrooms 60″ x 42″.
How tall is a standard shower wall?
First, the shower wall should measure at least 72 inches high from the bathroom floor outside the shower. The next measurement should be at least 70 inches and should be taken inside the shower, from the drain to the top of the wall.
