Table of Contents
A newly built deck that uses pressurized wood will need time to dry completely before a sealer can be applied. The chemicals used to treat the wood leave moisture behind, and depending on the climate, it can take anywhere from a few weeks to a few months until it’s dry enough to seal.
How soon can you put Thompson water seal on treated wood?
Some, like Thompson’s® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson’s® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.
What happens if you stain treated wood too soon?
Staining too soon can lead to the stain not being absorbed by the wood and result in a patchy and failed upgrade for your deck. Make sure the wood has dropped all of the excess moisture before trying to apply stain. Test to make sure that water is absorbed by the wood which ensures this drying process is done.
Can you seal wet pressure treated wood?
No, pressure-treated wood isn’t waterproof. The chemical preservatives present in the wood can’t protect it from decay. That means pressure-treated wood can absorb moisture and rot over time. However, you can waterproof and seal pressure-treated wood to protect it against water damage.
How long should you wait to seal a new deck?
DO wait 30 days before sealing a new deck. But preservatives in the wood often require about 30 days’ dwell time before the deck can soak up the sealant. After a 30-day period, pour some water on your deck. If it beads up, the wood is still too wet to seal, but if the water is absorbed, it’s ready to seal.
Can you stain pressure treated wood right away?
Recently, pressure treated lumber will have a high moisture content and may take several weeks to dry. Staining pressure-treated wood is ineffective if the wood is still wet. Kiln-dried wood will be dry at purchase and can be stained immediately.
What is the best sealant for pressure treated wood?
Best Deck Sealers for Pressure-treated Wood Ready Seal 520 Exterior Stain and Sealer for Wood. SEAL-ONCE Nano+Poly Ready Mix Penetrating Wood Sealer. #1 Deck Premium Semi-Transparent Wood Stain for Decks. Thompsons Waterseal Solid Waterproofing Stain. Eco Advance Wood Siloxane Waterproofer Concentrate.
Should I use Thompson water Seal on pressure treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
What happens if you paint pressure treated wood too early?
Your Board Will Warp If you paint treated lumber before it’s dry, you cause the non-painted side to dry faster. And when one side dries faster than the other, you get warping. You’re better off waiting until the wood is dry; otherwise, you’ll end up with warped wood, peeling paint, and a big project.
What is the green stuff on pressure treated wood?
Why is some treated wood green? The green color you see on treated wood is caused by chemical reactions that take place between the preservative components and the wood. Copper is still the most widely used element in wood preservatives and creates a green color on the wood.
How long does it take for pressure treated wood to dry after rain?
Wait 24 to 48 Hours.
How long do you have to wait before you can stain treated wood?
Before you can stain, wait 72 hours for pressure-treated wood to dry completely if has been kiln-dried at the lumber yard. You can check the board for tags and ask the hardware store staff if it’s already Kiln dried If not, it usually takes a few weeks to six months before you can stain.
How long should you wait to stain a new pressure treated deck?
Pressure-treated lumber should be allowed to dry for at least six months before stain or any wood treatment is applied. A good test is to pour water on the boards. If it beads up, it’s still too wet. If the water soaks in, it’s ready for stain.
Is it better to stain or seal a deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
How often do you seal a deck?
When Should I Reseal My Deck? You should reapply wood sealer at least every three years. In many cases, you need to seal a wood deck once a year. The more foot traffic and sun exposure your deck gets, the more often you need to apply deck sealant.
What temperature should it be to stain a deck?
If you’re staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren’t in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.
How do you get pressure treated wood to dry faster?
How to Speed up Drying of Pressure Treated Wood. The fastest way to dry treated wood is by having it kiln dried by the manufacturer. This takes one to eight weeks. You can also lay the treated wood flat and stack them in a crisscross pattern to air-dry for 2-3 days.
Should you sand pressure treated wood before staining?
Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you’ll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible. Once the wood has dried completely, it’s ready for a coat of transparent or semitransparent stain.
Is it better to paint or stain pressure treated wood?
For similar reasons, wet lumber can hinder how well paint adheres to the wood, but the added problem of the preservatives in pressure-treated wood makes it difficult for the paint to bond; this is why it’s advisable to stain pressure-treated wood instead of paint, as painting requires additional preparation.
