Table of Contents
To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Where should blinds brackets be placed?
Inside Mount Installation: Position the first bracket in the upper corner of the window frame. Drill pilot holes where the screws should go, then drill the screws into place to secure the brackets. Install the blinds by sliding the headrail into the brackets. Close the brackets to secure the headrail into place.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
How do I know what size blinds I need?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
How do you hang blinds without drilling holes?
How To Hang Blinds Without Drilling Holes Magnetic Blinds. The magnets at the back of these brackets make installation a rather seamless process. Tension Rods. Hang these blinds on a tension rod, which you can position inside your window trim. Command Strips. Self-Adhesive Blinds.
How do you hang blinds without brackets?
Place the head rail over the top window trim and center it over the window. Place a bubble level on top of the head rail and position the blind so it remains level on the top window trim. Mark the holes you drilled onto the head rail by placing a screw into each hole then pressing the screws into the wood.
How wide should outside mount blinds be?
Round off your measurements to the nearest 1/8 inch. As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening. So a 42-inch-wide window calls for a 48-inch-wide blind that allows for a 3-inch overlap on each side.
How much space between blinds and window frame inside Mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width.
How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
What is the average size for window blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
Is it OK if blinds are too long?
It’s simpler than it looks to shorten blinds. Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
Should blinds be exact length?
Measuring The Size You Want Your Blinds To Be, Not the Size Of The Window Opening. When you order inside mount window coverings from Blinds.com, we always ask for the EXACT size of the window opening, edge to edge.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
Is it easy to install blinds?
INSTALLATION FOR AN OUTSIDE MOUNT Horizontal blinds are easy to install. A screwdriver is all that is needed to install your blinds, or for an easier installation, you can use a cordless screwdriver, or a drill with a 1/4-inch Hex head drill bit. Before starting, carefully unpack your blinds and mounting hardware.
Will no nails hold up a blind?
As blinds are relatively heavy items – particularly those made of plastic and wood – you should purchase the strongest tape possible. Because Unibond No More Nails On A Roll has immediate grip and can support up to 120kg per roll, it is ideal for putting up blinds without drilling holes.
Can you hang a blind with Command Strips?
Command strips work on painted wood, tiled walls, glass, drywall, and metallic surfaces. You can hang your blind on the window frame or on the wall beside it. Using command strips cost only a few dollars, while a professional installation will cost you a lot more.
