Table of Contents
Most water heater manufacturers will recommend inspecting the condition of the sacrificial anode every one (1) to three (3) years and replacing it when it has been consumed more than 50%. This is especially true if you have hard water or use a water softener.
How long should a water heater anode rod last?
When there’s no sacrificial metal left on the anode rod, your water heater tank can rust out, eventually causing it to burst. Anode rods generally can last about three to five years but it really depends mostly on the quality of your water and how much water travels through your water heater.
How much does it cost to replace a water heater anode rod?
An anode rod costs about $50. Some homeowners may feel comfortable replacing it themselves. If not, call a professional plumber, who can assist. The cost of having it replaced professionally may be around $250 or $300.
When should I change the anode rod in my water heater?
When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every five years, you can double the life of your water heater.
How often should an anode rod be?
As a general rule, anode rods need to be replaced about every 4-5 years. However, this can vary depending on how much water flows through your gas water heater or electric water heater. Very large families, for example, may use a lot more hot water, and may need more frequent anode rod replacement intervals.
How do I know if my hot water heater anode is bad?
A bad anode rod can cause discolored water, a rotten egg smell, air in the lines and intermittent hot water. The anode rod protects the tank of electric water heaters & signs it should be replaced are a rotten egg smell, no heat & strange sounds.
Is it too late to replace anode rod?
Anode rods are relatively cheap, usually costing between $30 and $40, and a plumbing pro can install them safely and quickly. The downside is that if you wait too long to replace the anode rod, it may be too late. If more than five years has passed, it may be too late to save the water heater.
Should I replace my 15 year old water heater?
Anyway, you should consider replacing your water heater if it’s about 6-12+ years old and when you start running out of hot water faster. However, age and lack of hot water aren’t everything. You could have a 15-year-old water heater that works just fine and wouldn’t need replacing.
How long will water heater last without anode rod?
Diminished Water Heater Lifespan: Without a sacrificial anode rod replacement, the average tank water heater will last a maximum of 8-12 years. However, your water heater may start failing as early as 5 years old without this essential care.
Are anode rods universal?
In most cases, water heater anode rods are universal. The only exceptions are : Buderus : They use another type of threading to install the magnesium anode. All other water heater brands use a regular magnesium anode with 3/4 ” NPT threads.
How do you test an anode rod?
Open the spigot and drain a little water to relieve some pressure and heat inside the tank before opening the top for the anode rod. Next, go to the top of your water heater and look for a hex head bolt. If you don’t see the hex head, it’s likely built into your water heater system.
Which is better aluminum or magnesium anode rod?
For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.
Can anode rod causing rotten egg smell?
The most common cause of smelly water is anaerobic bacteria that exist in some water and react with the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor.
How do you clean an anode rod?
You cannot clean your anode rod in your water heater . However, it is important to inspect the sacrificial anode rod every 1 to 3 years and replace it after more than 50% of its wear and tear to avoid corrosion of your tank.
How do I know what size anode rod to buy?
As a rule you want the anode to be “tip to toe” running the full height or length of the tank. If you cant see your brand on the chart then just measure the length of the tank and pick the closest length of anode. If the anode is too long they can be simply cut to length with a hack saw.
Are powered anode rods worth it?
Overall, there are quite a few advantages to using powered anode rods. They don’t degrade, prevent smelly water (by killing anaerobic bacteria that leads to that rotten egg smell), and protect your hot water heater from corrosive elements in the water. Probably the best powered anode rod today is made by Corro-Protec.
Does a gas hot water heater have an anode rod?
Inside the Tank In glass-lined tanks, there will be a metal rod in the tank, usually magnesium or aluminum, called a sacrificial anode. The anode rod is bolted and fastened to the top of the tank and extends deep into the tank.
What is the expected life of a hot water heater?
The type of water heater and where you are located: While many say 8 to 12 years is the expected life for a standard gas-powered water heater, this range can change and be very dependent on where you are located. The level of sediment in your tank affects the lifespan of your water heater.
When should you take magnesium anode?
A magnesium anode is used as a sacrificial anode in cathodic protection. Magnesium has the highest driving voltage of all the materials used for sacrificial anodes. Magnesium is low on the noble scale, and therefore corrodes easily.
Do anode rods work?
As long as the anode rod is degrading in the tank, the tank lining will be protected from rusting. This is accomplished through a process called electrolysis, by which the metals in the anode rod attract ions that normally cause rust in iron and steel. These ions are what cause the anode rod to degrade over time.
