Table of Contents
When Should You Grease Your Bearings With a larger travel trailer, you should grease your trailer wheel bearings every 10,000 miles or once a year, whichever comes first. If you have a smaller travel trailer, however, you’ll need to grease your wheel bearings every 2,000 miles.
How do I know if my trailer bearings need grease?
Keep your hand on the wheel and spin it. If you feel any motion that is not smooth, hear any noises, or if the wheel does not spin freely, the wheel bearing is defective or needs lubrication.
How often should you grease utility trailer bearings?
Proper lubrication helps maintain functionality and reliability of your trailer’s axle(s). Bearings should be lubricated approximately every 12 months or 12,000 miles unless otherwise specified by the axle manufacturer.
Can you over grease trailer bearings?
They keep grease packed into the hub. munchy wrote: More grease is never the right answer. Overgreasing can actually cause the rollers/balls to slide over the bearing surface rather than roll over them.
How long does trailer bearing grease last?
Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity.
Should I fill my trailer hub with grease?
1 and 2), pump a ring of grease into the entire circumference of the wheel hub and coat the hub cap inner wall. The housing should only be half full of grease. Too much grease causes churning and higher temperatures. Semi-fluid grease must be used with a vented hub cap.
Can you put too much grease in a Bearing Buddy?
Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781. The convenience of easy filling through the zerk fitting can often mean we can be tempted to keep adding more grease.
Should a trailer ball be greased?
You do not need to grease your trailer hitch ball. That is entirely up to you. However, greasing it is recommended. Greasing will help ensure that the trailer hitch ball keeps its structural integrity, and it will help prevent it from squeaking.
How often should you change trailer wheel bearings?
Expert Reply: We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage or wear and replace anything if needed.
Are bearing buddies a good idea?
Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it’s very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road trips so the would work well for you.
How do you know when a Bearing Buddy is full?
The air pockets inside the hub cavity and Bearing Buddy® will work their way out past the piston (or blue ring) on the Bearing Buddy®. You should see the piston extend out or the blue ring past the front of the Bearing Buddy® when it’s properly filled.
How warm should trailer bearings get?
About 130-140 is too hot to touch and anything above that probably too hot for a wheel bearing. Compare it to your hot water temp at home. If you can’t touch the wheel then I would consider them too hot… warm to the touch is OK.
How often should you grease a fifth wheel?
Ideally, most tractor trailers should be manually greased at all lube points at around 12,000–24,000 miles and more frequently on the fifth wheel.
How much play should a trailer wheel bearing have?
For context, the tolerable end-play for truck wheel bearings is the same: 0.001 to 0.005 inches, also expressed as 1 to 5 mil or 0.025 to 0.127 mm. In other words, it’s perfectly acceptable to adjust wheel bearings so that they are just a little bit loose, but not too loose.
How often should you grease trailer hubs?
When Should You Grease Your Bearings With a larger travel trailer, you should grease your trailer wheel bearings every 10,000 miles or once a year, whichever comes first. If you have a smaller travel trailer, however, you’ll need to grease your wheel bearings every 2,000 miles.
How much grease should you put in a bearing?
FOR STARTERS, note that most sealed bearings come pre-greased from the factory with a 25%-35% grease fill. This is all the grease the bearings will ever need, because the relubrication interval (explained below) is longer than the expected life of the bearing.
How long do bearing buddies last?
Some experts give them a life span of 85,000 to 100,000 miles.
Do bearing buddies grease both bearings?
Expert Reply: Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. It would then fill the cavity inside the hub and continue to the inner bearing.
How do I keep my bearing buddies from falling off?
If they are off just a little, when the wheel spins the Bearing Buddy can kind of wobble and work itself loose. The do-it-yourself method is to get the Bearing Buddy started then place a block of wood across it and tap it in with a mallet. The wood distributes the force of the mallet more evenly than not using it.
