Table of Contents
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How often do you need to sharpen a chainsaw chain?
In most cases, sharpening the chain should happen after ten times of being in use, while in other situations, you have to sharpen it after every session.
Why does my chainsaw chain get dull so fast?
With a single contact with the ground while running, a chainsaw can become very dull. This is because the ground contains sand and dust which is abrasive and contains a lot of tiny rocks. To avoid such occurrences, avoid cutting wood placed on the ground.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How long should a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Do new chainsaw chains come sharpened?
Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job. But even the sharpest chain for the chainsaws available in the market will lose their sharpness over time and grow very dull.
Why do loggers run upside down bars?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. This reduces a chainsaw’s ability to cut accurately.
How much does it cost to have a chainsaw sharpened?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
How fast do chainsaws dull?
When you consider how fast the chain is moving, it’s not hard to understand that it can become very dull very quickly. Just hitting one little rock can dull a chain instantly. Like DavidV said, get yourself a new chain, keep it out of the dirt and sharpen it after every tank of gas to keep it from getting dull.
Why does my chainsaw blade smoke?
While a chain saw does produce some heat while in use, it should never overheat or begin smoking. The most likely causes of smoking and overheating are a lack of air and/or a lack of lubrication to the engine or the chain saw chain guide bar.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. You will probably be able to get up to 10 rounds of sharpening before the chain becomes too short – depending on your chainsaw. After that it will need replacing.
How tight should a chainsaw chain be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Can a chainsaw cut against the grain?
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side. Alternatively, your cutting teeth could be uneven in length.
When should I replace chainsaw chain?
Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.
Why does my chainsaw always cut to the right?
Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. If you sharpen your chain at a 25º setting on your left hand, your right hand cutters should match.
Can you sharpen a chainsaw blade?
Chainsaw chains are sharpened with special files. While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32. Select the correct size for your chain.
What chainsaw do loggers use?
The Stihl 500i is generally seen as the ultimate logging chainsaw. It is Stihl’s top-of-the-line professional chainsaw and has been designed and built especially for the logging industry and professional arborists.
