Table of Contents
How do I calculate how much wood I need for a deck?
The first step for answering “how to calculate how much decking I need” is to determine your deck’s square footage, or area, by taking the length of your deck times the width (L x W). EXAMPLE: For a deck that is 16 feet long and 12 feet wide, multiply 16 by 12. This gives you 192 square feet, your deck’s total area.
How much wood is needed for a 12×12 deck?
A 12 -by-12-foot deck will need 144 lineal feet of decking. The amount of individual boards will depend upon the size and type of decking your choose and the amount of space you plan to leave between decking boards.
How much does it cost to build a 12×12 deck?
Cost To Build A Deck By Size Deck Size Square Feet Average Cost 10×10 100 $1,500 – $3,500 10×12 120 $1,800 – $4,200 12×12 144 $2,160 – $5,040 12×20 240 $3,600 – $8,400.
How much does it cost to build a 16×20 deck?
On average, you can expect to pay about $20,000 for a 16 x 20 foot composite board deck.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
How much does it cost to build a 12×12 floating deck?
A 12 x12 deck can range in cost from $2 200 to $13 000, but the average will be $6 000. Costing $40 a square foot but can be as little as $15 or as high as $85, depending on the deck’s features.
How many posts do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.
Is it cheaper to build your own deck?
When you construct a basic deck with the least expensive lumber on the market, you will probably pay between $8-10 for every square foot of area if you build it yourself. But, if you hire someone to build it, you could end up paying as much as $25 per square foot.
How much does it cost to build a deck DIY?
How much does it cost to build a deck? For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) of deck area if you do the work yourself or pay about $30 per square foot if the material is professionally installed.
Is it cheaper to lay a patio or decking?
Key Points When Choosing Decking or Paving Decking is more affordable, quicker to install but doesn’t last very long. Paving slabs can be pricier, take longer to install but require little-to-no maintenance and will last for a long time.
What is a good size deck?
Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!May 21, 2020.
What does a Trex deck cost?
Trex Decking Cost Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation. Size is the biggest price factor, with 144 square feet ranging from $1,440 to $3,900 compared to $3,000 to $8,100 for 300 square feet.
How many hours does it take to build a deck?
You can save most of that cost by putting in some serious time and sweat equity. A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.
How far can a 2×8 span for a deck?
Depending on various factors, the maximum span for a 2×8 floor joist is 16′ 6”. The maximum span for roof rafters is 23′ 9”. For headers, the maximum span is 11′ 2”. Finally, a single deck beam has a maximum span of 5′ 11” and double maxes out at 8′ 9”.
Can I use 3×2 for decking?
3×2 can be used but you’ll have to support it more frequently throughout its length, say every five feet or so.
How far apart should the posts be on a deck?
Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.
