Table of Contents
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
Can curtains be wider than the window?
DON’T Go Too Narrow. Select a curtain rod that is wider than the width your window. This will allow enough room for the panels to hang on either side of your window, and will force the panels to cover the window at all times. The rule of thumb is to go 8″-12″ wider than your window.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should I hang my curtains?
Each curtain panel should be at least as wide as your window. Measure from the spot you plan to hang the rod (usually four to six inches above the window, but a minimum of two inches) to the floor to figure out the length of the curtains. Add more length if you want the drapes to pool.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
How wide should curtains be for 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
How wide should curtains be for 70 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How do I calculate how much fabric I need for curtains?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How far should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Should you hang curtains above window?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How do you hang curtains to make a room look bigger?
Hang the Curtains as High as Possible In order to make your window and the whole wall seem higher, put the curtain rod as high above the window as possible. Attaching the rail close to the ceiling tricks the eye into believing the wall is bigger. Thus, it visually expands the whole room.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How wide should curtains be for a 43 inch window?
Curtain widths should typically be about 1 1/2 to 3 times the final width measurement of your window. However, the fullness you choose will ultimately define the style you want to achieve.
Are 84 inch curtains long enough?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How many curtain panels do I need for one window?
Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.
How wide are typical curtain panels?
It can vary from 50″ up to 58″, and some fabrics, especially sheers, can some in double width at 108″ wide. But the standard in the U.S. is 54″.
How do I calculate how much curtains I need?
If you’re adding trim to the bottom of the curtains, take the fabric width you calculated per the Homes Furnishing guide and divide that number by 36 to determine the width in yards. Multiply the result by the cost per yard of the trim.
How wide is curtain fabric?
Curtain fabric is always sold with the length of the curtain (the drop) coming off the roll and the width of the fabric is used for the width of the curtain. Curtain fabrics are 137 cm wide as standard. Some come wider, some narrower, so it’s worth checking your fabric, but the average is 137 cm so we’ll go with this.
How much fabric do I need for 84 curtains?
Covering an 84-inch window will take two widths of the fabric. Taking the length of 90 inches and multiplying it by 2, gives us 180 inches. This is equal to 15 feet, or 5 yards. In this example, curtains for a window 84 inches wide would need 5 yards of fabric.
