Table of Contents
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Can my deck hold 5000 lbs?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So, a 100 sqft deck would be designed to support 5000 lbs.
How much weight can a 12×12 deck hold?
A 12’x12′ (144sq’) deck properly supported can hold 5 760lbs on it. you build. All floating decks, in fact, all decks built to code, can support no less than 40 lbs per square foot of deck.
Can my deck support a hot tub?
A hot tub on a deck is entirely possible, and it is possible your deck is already equipped to handle one. A deck designed to hold at least 100 pounds per square foot will support nearly any type of hot tub.
How many people can a deck safely hold?
As a general rule, Pologruto said homeowners should determine how many people they expect to host on their deck and estimate about 15 square feet of deck per person. To comfortably fit around 20 people, the deck will need at least 300 square feet of open space.
How much weight can a porch support?
Most decks will hold more – sometimes significantly more – than 50 pounds per square foot. That number is simply a minimum requirement. The average homeowner does not have the tools available to determine how much more weight your deck can hold than the code minimum of 50 pounds per square foot.
How much support does a deck need?
Before starting to build, the first question is: How many footings do I need for a deck? For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it. If your deck will be a different size, it’s easy to figure out how many you’ll need.
How much load can a 2×8 support?
A 2×8 will adequately support a dead load of 20 psf and a live load of 40 psf depending on some factors, including allowable span. This equates to a total load of 60 psf. Therefore, for a 2x8x10, the total load would equal 600 pounds per lineal foot.
What is deck dead load?
Dead Load consists of the weight of the deck structure that sits on top of the posts. An average deck would be designed to handle a load of 50 psf (pounds/square foot) and is made up of 10 psf for the dead load and 40 psf for the live load.
How heavy is a 6 person hot tub?
In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
How much weight can a pressure treated 4×4 hold vertically?
Generally, you can expect a vertical 4×4 to support at least 4,300 pounds, but the amount of weight could be significantly higher than that in some cases. Even at 12 ft high, a vertical 4×4 made out of No. 2 Southern Pine will hold over 3,000 pounds.
How much weight can decking hold UK?
This makes the structural support a vital aspect to ensure that the structure can hold the weight. A rough guide is that a timber deck built at ground level, up to two feet off the ground, can support up to 100 lbs per square foot. This should be sufficient for most smaller scale hot tubs.
How much weight can a 2×6 deck support?
According to the Codes, a 2×6 on edge with the weight pressing through 5.5” of wood will support approximately 53lbs per linear foot. So, an 8-foot length will support about 424lbs. However, a short span 2×6 on edge can support between 600 and 900lbs depending on wood species, grade, and other factors.
How large can a floating deck be?
It takes up less than 200 square feet. It’s not more than 30 inches above the ground. It’s not attached to your house. It’s not in front of an egress door.
Can you put a hot tub on a 2nd story deck?
A hot tub is an ideal way to upgrade your deck. If you put a spa on a second-floor deck, be sure to have the structure inspected by a licensed contractor.
How much does a deck weight per square foot?
A 10’x10′ deck is 100 square feet, 950lbs divided by 100 square feet gives us a weight of 9.5lbs per square foot. With that in mind, a 150 square foot deck would weigh roughly 1,425lbs.
How many supports do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts.
Is 4×2 OK for decking?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
How far can a 2×8 span without support?
Based on different manufacturers’ specifications, the maximum span a 2×8 LVL is from 12′ to 15′. Spans are also affected by the species of wood used in the manufacture of the laminated joists, with western woods edging out eastern woods in unsupported span distance.
Can I use 2×8 for deck joists?
2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.
How much load can a 2×10 support?
How Much Weight Can a 2×10 Beam Hold? A 2×10 beam is meant to hold up to 40 psf of live load and 10 psf of dead load, just like a joist. An SYP 2×10 single-ply beam can hold 144 pounds per lineal foot (plf). A double-ply beam of the same species can hold 288 plf and a triple-ply can hold 488 plf.
