Table of Contents
We recommend using a minimum of 1 part GOLDEN Medium to 10 parts water to thin acrylics above a 1:20 ratio, or whenever more durability is needed. Doing so will increase film strength and lower sensitivity to both water and other GOLDEN Mediums and Varnishes.
How do you dilute acrylic paint for pouring?
A ratio of one part paint to three parts water should be enough to break down the acrylic binder so that the paint acts like watercolor. Also use fluid acrylics for glazing over another color, for creating drips (an eye dropper works well for this), for bleeding colors into each other, and for pouring.
Can you add water to acrylic paint for pouring?
In Acrylic Painting, you use water to dilute your acrylic paints. This works well, but is not recommended for Acrylic Pouring. Water not only changes the consistency, but also the pigment density and the adhesion of the paint to the painting surface. This means that the colors are lightened and no longer so bright.
What do you mix with acrylic paint to pour?
To thin and mix paint for acrylic pouring you will use two main ingredients: acrylic paint and pouring medium. You mix the paint with the medium until your final mix runs like warm honey, motor oil, or chocolate syrup. If necessary add some water to thin further.
How much pouring medium do you mix with acrylic paint?
A typical rule of thumb for medium body acrylics is 1 part paint to 3 parts pouring medium, meaning you’re using more pouring medium than you are actual acrylic paint.
What can you use instead of Floetrol for acrylic pouring?
Elmer’s Glue is probably going to be your cheapest Floetrol substitute option, other than water. If you dilute your glue with a little bit of water, you will get a similar pouring consistency as Floetrol. Your painting will dry to a matte finish when using Elmer’s Glue-all (very similarly to Floetrol).
What can you substitute for pouring medium?
So in short, the best alternatives to pouring mediums are Mod Podge, PVA Glue, or regular Elmer’s Glue. All of these alternatives work perfectly as a substitute for commercial pouring medium.
What is the difference between Floetrol and pouring medium?
Formulated as a latex paint additive and commonly used to paint the exteriors of houses, Floetrol mixes very well with acrylics to create free-moving paint without affecting the binding. Unlike Liquitex’s pouring medium, this one leaves a matte finish, which may be more appealing to some artists.
What is the best thinner for acrylic paint?
There are two choices for thinning acrylic paint: water or acrylic medium. Water breaks down the binder in acrylic, thinning the paint so that it looks like watercolor and allows it to sink into the surface, resulting in a matte finish.
What is the ratio of Floetrol to paint?
Floetrol mix ratio: 2/3 Floetrol to 1/3 paint. Add water to consistency.
How do you mix acrylic paint for pouring cells?
Often the mixing ratio is 1 part color with 2 parts pouring medium. In addition, often some water is added to obtain a more liquid consistency.
Can you make your own pouring medium?
Making your own paint pouring medium is really easy to do, and a lot less expensive than buying your own if you just want to try out the technique and see if you like it.
Can you use PVA glue as a pouring medium?
PVA, or polyvinyl acetate, glue works quite well as a pouring medium. The texture and composition mix nicely with acrylic paints and dries into a sturdy, slightly flexible, solid that adheres to many different painting surfaces. PVA glue is also relatively inexpensive and easy to find in most countries.
What makes the best cells in acrylic pouring?
The optimal method of creating cells in your acrylic pour is by varying the consistency and density of the paint. This makes them a very popular choice for acrylic paint brands. However you can also check the density by weighing each of the colors in your pouring mix on a scale before layering them in your cup.
Can you use dish soap as a pouring medium?
Your Pouring Medium can be many things. We have experimented with water, Mod Podge (Glossy), dish soap, PVA Glue, Acrylic Flow Improver and more. How much you add will depend on how much paint you are using. Some people say a 1:1 ratio or 40% Pouring Medium to 60% Paint.
Can you use Elmer’s School glue for acrylic pouring?
If you want to try it without the price rage of expensive name brand mediums and the messiness of silicone, you can use Elmers Glue All (not school glue) and acrylic paints . It is important that you use liquid body acrylics for they lend themselves to be poured.
How do you make a pouring medium for acrylic paint?
Alternate DIY Pouring Medium Recipe 3 Parts Floetrol (300 grams) 2 Parts PVA glue, Elmer’s Glue or Modpodge (200 grams) 1 Part Pouring Medium (100 grams) ¼ part water (25 grams).
Why did my acrylic pour painting crack?
Crazing happens when the top layer of the acrylic pour painting dries faster than the underlying layer which is still wet. When this happens the top layer of the acrylic film will form a skin as it hardens and continues to stretch, and if it hardens too fast it will break.
Why do you need a torch for acrylic pouring?
Why do you use a torch on acrylic pours? The use of a heat source on the surface of an acrylic pour helps break the surface tension of the top layer of paint. This allows lighter weight colors rise through the heavier colors and it helps close air pockets and bubbles that may form.
Can you use alcohol to thin acrylic paint?
Rubbing alcohol and mineral spirits can also be used to thin acrylic paints enough to remove the paint from objects such as paint brushes. Mineral spirits can also be used on acrylic paints that are not water based, in these situations mineral spirits are the only thing that thin the paint.
What can you add to acrylic paint to make it thinner?
Acrylic paints can be thinned by adding water, a pouring medium, or using an acrylic binder.
