Table of Contents
You will pay somewhere between $100 and $450 for a transmission cooler line replacement. The labor should be between $60 and $300, while parts can cost you anywhere from $40-$160.
How much is it to replace transmission lines?
Like all parts of an engine, transmission cooling lines can wear out. If they break or develop a leak, you will lose transmission fluid, leaving your car vulnerable. Thankfully this is a fairly simple fix, and most transmission line repairs cost between $100 and $500 dollars.
What causes transmission cooler lines leak?
Transmission cooling lines leaking means either low-level of fluid or interrupted flow in the transmission. In both cases, the result is an overheated transmission that may stop functioning if the condition persists. Sometimes, it is difficult to spot the leak at the initial stage.
How long does it take to change transmission lines?
Transmission repair can take a full day but it will take at least 3 to 4 days to rebuild a transmission.
How do you change a transmission cooler line?
How to Change Transmission Lines: Do It Like a Pro Raise the Vehicle. Drain the Transmission Fluid. Remove the Transmission Cooler Lines. Drain More Fluid. Spray Brake Cleaner. Install the New Transmission Lines. Replace the Transmission Fluid. Lower and Start your Vehicle.
What fluid runs through transmission cooler lines?
How Car Transmission Lines Work. Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. Also known as transmission cooling lines, they are typically made of metal or composite aluminium and rubber hoses because they can handle the flow of hot transmission fluid.
Can I replace steel transmission cooler lines with rubber?
You can use rubber hose, but make sure it’s transmission cooler line rated. The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.
How do you know if your transmission cooler is bad?
The most common symptom of a bad or clogged transmission cooler is fluid leaks or an overheating transmission. You may notice strange shifting issues or noises coming from the transmission. In many car models, you will also notice a warning light on the dashboard.
Can I drive my car with a transmission leak?
Can I still drive my car when it’s leaking transmission fluid? It’s possible to drive your car when its leaking transmission fluid, but it’s probably not a good idea since your vehicle won’t drive as required.
Can I delete transmission cooler lines?
Remove the two transmission cooler lines from the bottom of the radiator. These two lines can be accessed either from underneath the hood or underneath the vehicle. Use the flare nut wrench to remove the lines in the same manner used to remove the lines from the transmission.
Does it matter which transmission line goes where?
Generally the higher line on the radiator has fluid going INTO the transmission and the lower one goes back to the transmission, so the higher line has fluid coming out of it and the lower line sucks it back into the transmission.
How do transmission cooler lines connect to radiator?
Transmission coolers do not attach to the radiator. They attach in-line with the transmission fluid return line. It is common for an OEM transmission cooler to be built into the radiator tank to be cooled by the coolant in the radiator.
Are transmission cooler lines high pressure?
Its NOT only pressure you have to worry about, its also compatibility with the trans fluid. NOT aware of the pressures being any higher than other transmissions, so if you use “Transmission Cooler Hose” you should be fine.
What happens if you put transmission cooler lines backwards?
If you had it reversed, the pump would be trying topush fluid through the bottom of the cooler, up through the cooler, out the top into the bottom of the rad, and up through the rad to the top. More weight to push.
Do you have to bleed transmission lines?
Do i need to bleed the cooler once installed or will the air just get flushed out? You would not need to bleed the transmission cooler part # D13503 before you install it on your truck. The fluid is thick enough and the pressure it high enough that air bubbles would immediately work themselves out.
What size are transmission cooler lines?
Transmission Radiator end of fitting has 1/4″ MPT. line fitting is 1/2″-20 inverted flare INS. – Factory fitting remains with recessed internal threads.
Is fuel hose OK for transmission fluid?
Fuel line will work for oil or atf. They also say if it is high pressure on the hose”fuel injection”. Just dont use vacuum hose. You will be fine with high pressure fuel line, but do not use the low pressure stuff.
Which transmission line is the inlet?
In most cases, the line from the transmission to the top of the radiator is the hot or inlet line. The lower line near the bottom will be the return line.
Can you drive with leaking transmission cooler?
While it is not especially dangerous to continue driving with a leaking transmission fluid, it can cause catastrophic damage to your engine. As soon as you notice your car is leaking transmission fluid, you should seek to contact a certified mechanic to have your transmission fluid serviced.
