Table of Contents
The u-joint replacement cost is estimated between $225 and $300. Labor makes up about $100 to $125, while the parts should be between $125 and $200. However, these prices vary based on what make and model vehicle you drive.
What are the symptoms of a failing u-joint?
Signs of a Loose U-Joint Clunking/clanking noise when you shift gears. Vibration when accelerating or decelerating. Loud metal-on-metal banging (this is a sign that the u-joint will completely fail very soon).
How hard is it to replace AU joint?
Replacing these joints is a fairly straightforward job, though it takes some prior experience. To begin, you’ll need a universal joint pressing tool. You can also take advantage of the loaner tools program at your local Advance Auto Parts store. Then follow these step-by-step instructions on how to change U joints.
How long does it take to replace driveshaft u-joint?
On a typical labor book, a U-joint replacement is one or two labor hours, meaning that a $25 part can cost substantially more once someone else installs it for you and charges around $100/hour.
How long do u-joints usually last?
U-joints can last decades, or they can break when the vehicle is still new. That’s why it’s a good idea to check the u-joints at every oil change. A typical rear wheel drive vehicle has 2 or 3 u-joints. Some vehicles with a long wheel base, such as buses, have 3 or more u-joints.
What causes AU joint to break?
This usually happens because of corrosion, excessive jolting or vibration, or because the bolts were not properly torqued into place. A worn or cracking transmission or differential housing can also cause this. Of course, u-joint failure isn’t limited to these three causes.
What happens if my drive shaft breaks while driving?
If your driveshaft breaks while driving, you will end up losing the traction that the drive shaft provides. You will also lose stability in your car since it can no longer rely on its wheelbase. If you are unlucky, this could mean a complete loss of control of your vehicle and possible accidents.
Can you reuse U joints?
You can reuse a u joint. If it’s that new, anyway. A vice, a socket that’s the same diameter as the joint caps and a BFH are all I use to swap em out.
How much does it cost to replace a driveshaft?
In most cases, a new drive shaft costs somewhere between $300 and $1300. Fortunately, it only takes about an hour to replace it. A repair usually costs much less, around $200 to $300 including parts and labor, but this also depends on how many parts need to be replaced.3 days ago.
How much does it cost to fit a drive shaft?
Driveshaft Replacement Cost On average, you can expect to pay anywhere from $400 to $1,260 total but it can easily approach close to $2,000 for some vehicles. If you have a four-wheel drive vehicle, you may have two driveshafts but in most cases, only one will need to be replaced.
How much is a front drive shaft?
Driveshaft prices can vary wildly, depending on what kind of vehicle you have, which shaft you need replaced, and whether it’s a single or two-piece driveshaft. Front driveshafts are commonly between $150 and $250; the larger rear shafts start around $250 and can reach $400 and above, possibly more for a two-piece.
Will a stiff u-joint cause vibration?
Drive line vibration, after u-joint replacement, is usually the result of a u-joint not properly posi- tioned, or yoke ears which are binding. In either case the problem can usually be pin pointed by articulating the drive shaft. The replacement u-joint, even though centered, could cause the shaft to vibrate.
How long do drive shafts last?
While there is no set lifespan of a driveshaft, it typically can last about 75,000 miles. Keep in mind depending on the vehicle, and wear and tear you may get much less or much more.
Can you drive with broken Ujoint?
Vehicle Cannot Move The final stage of a bad U-joint is a vehicle incapable of moving anymore. When the universal joint breaks down, the driveshaft will drop, no longer able to transfer power. At that point, you may not be able to get away with just a U-joint replacement; the entire driveshaft might need to be changed.
What is one of the most common causes of universal joint and driveshaft failures?
The three most common causes of failure are: Misalignment of the drive shaft. An out of balance load. Over-stress.
Why do drive shafts break?
Excessive weight: Apart from the problems naturally caused by time, a broken driveshaft is often caused by excessive weight from different components of the vehicle. Pay close attention to the engine, transmission, and rear differential as they are usually extra heavy.
How do you test an AU joint?
If a u-joint is excessively worn, there’s an easy test you can perform. With your foot on the brake, shift the car into reverse. Then, shift into drive. If the vehicle makes a clunking sound, or you can feel it knock one time after engagement, a u-joint is likely the culprit.
Can a driveshaft be repaired?
Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200.
