QA

Quick Answer: How Much To Replace Alternator Belt

The replacement cost of an alternator belt is typically between $100 and $200. The part cost is between $25 and $80 while the labor cost is between $75 and $120. The true replacement cost will depend on how long it takes the mechanic to access your alternator belt.

Can you drive with a broken alternator belt?

Basically, you should be able to drive it to a safe space where it can be towed or repaired. If the belt is snapped and dangling in the engine compartment, remove it before moving the vehicle to prevent further damage.

How do you know if your alternator belt is bad?

Loose or Bad Alternator Belt Symptoms Battery / Alternator Warning Light. As the alternator or serpentine belt is powering the alternator, it will, of course, cause the alternator to struggle when the belt is loose. Squealing Noise when cold. Heavy or Jiggery Steering. Flickering or Dimming Lights. Sudden Stall. Dead Battery.

Can I replace my alternator belt myself?

Overview: Fan belt replacement Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

How long does it take to fix an alternator belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

What does a broken alternator belt sound like?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. As the belt wears out, the belt rubber hardens and cracks.

How do I know if I need a new alternator belt?

Signs You May Need A New Serpentine Belt Loud noise or screech from under the hood, particularly when you accelerate. Serpentine Belt shows signs of fraying, cracking, splitting, or glazing. Engine components such as power steering cease to operate. Engine overheats.

Is it my alternator or alternator belt?

If you crank the car and put a volt meter on the battery and it reads more than 12.6 volts, the alternator is working. (13.5 to 14.5 is good). If it is below 12.6 either the alternator is not working or it could be a loose belt.

What causes an alternator belt to break?

Serpentine belts can fail in a few different ways. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

How much does it cost to replace a pulley and serpentine belt?

It is very inexpensive to replace a serpentine belt whether it’s broken or loose. The replacement cost is only going to be between $100 and $200 in most cases. The belt itself will cost between $25 and $80 while the labor costs will probably be between $75 and $120.

How long does it take to replace an alternator?

In general, it will take about two hours for you to replace an alternator on your own, though this could vary somewhat depending on your knowledge of car mechanics. If you take your car into a shop in order to have the alternator replaced, timing may vary somewhat, and you may have to leave the car for the day.

Is alternator belt same as serpentine belt?

Sometimes called a fan belt, alternator belt, or accessory drive belt, the serpentine belt is spun by the engine crankshaft and, in turn, spins, or “drives”, the accessories. The belt should be changed as part of your routine preventative maintenance schedule to avoid failure or breakage while driving.

Is it easy to fix an alternator belt?

The alternator in your vehicle produces the electrical current necessary to power the engine and charge your battery, but its ability to produce electricity can be compromised by a worn out belt. You can replace these belts yourself using common hand tools.

Are belts expensive to replace?

Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

How much does a drive belt cost?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

What are the signs your alternator is going out?

7 Signs of a Failing Alternator Dim or Overly Bright Lights. Dead Battery. Slow or Malfunctioning Accessories. Trouble Starting or Frequent Stalling. Growling or Whining Noises. Smell of Burning Rubber or Wires. Battery Warning Light on Dash.

How often should you change alternator belt?

Under normal conditions, the belt needs to be replaced every 4 to 6 years. However, those living in areas where the temperature and humidity can vary greatly throughout the year may need to change it more frequently.

What happens if belt breaks while driving?

When the timing belt breaks, the crankshaft will continue to spin at 1000 rotations per minute, while the camshaft will stop turning. As a result, the pistons will continue to rise and fall in their cylinders, but they will strike closed valves.

How much does a serpentine belt tensioner cost?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146. Taxes and fees are not included in the estimate.