Table of Contents
Cost to Refinish a Table. A basic table will range between $200 and $600 to refinish. The process is typically the same regardless of condition, and price changes only based on size. For any wooden table, the process involves stripping the old finish and applying a new final coat.
Is it worth it to refinish a table?
Trying to refinish centuries-old furniture, without using a professional, can damage the furniture and lessen its value. The only exception to this rule is if the item has more personal value to you than what it is worth. However, wood furniture made between 1850 and 1960 are actually ideal candidates for refinishing.
How much does it cost to refinish tables and chairs?
Average cost of refinishing furniture ranges from $100 to $2,000. The total cost depends on difficulty, furniture size, its antique value and other factors. It could also be on a per-hour or per-project basis.
Why is refinishing furniture so expensive?
Furniture refinishing cost factors Because each piece of furniture is unique, the amount of work that must go into a piece will greatly affect the price. Even if an item is small (such as an end table or a child’s chair) and has intricate details in the design, it might take longer than you’d expect.
How do you tell if wood can be refinished?
Big scratches and dents, gray floorboards and splinters are all signs that your hardwood floors need refinishing. Refinishing hardwood floors can make old, worn surfaces look new again. In some cases, it’s the only way to restore damaged flooring to its original glory.
How much does it cost to repair wood table?
Repairing wood furniture typically costs $110 to $260. Wood furniture repair pros near you may charge $25 to $30 per hour plus materials for their services. You can often repair small scratches with a $5 to $20 repair kit.
Is it hard to refinish furniture?
When refinishing furniture, you must do the most unpleasant part of the job first. Removing the old finish can be a cumbersome and messy task. For a while early in the process, until you start getting down to the wood underneath the mess, you may feel that you have completely ruined the piece. Have patience.
How do you strip and refinish a table?
How to Strip & Refinish Wood Furniture Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. Step 2: Strip Away Old Finish. Step 3: Sand It. Step 4: Apply Sanding Sealer. Step 5: Stain It. Step 6: Apply Sealant.
How do I strip furniture?
One common method involves going over the surface with lacquer thinner and an abrasive pad, and finishing by wiping the piece down with a bit more thinner and a clean rag. But always check your specific product, as some may require mineral spirits or simply soap and water for proper removal.
How do I fix varnish on my table?
Where a clear finish is chipped but the underlying color is intact, fill the ding with a few drops of clear nail polish. After the polish dries, sand flush with 600-grit sandpaper. To restore the sheen on satin finishes, rub with 0000 steel wool and paste wax; for gloss finishes, use auto polishing compound and a rag.
How much does it cost to refinish a hutch?
Cost to Refinish Furniture by Item Furniture Item Refinishing Cost (Labor Included) Bed Frame $300 – $2,100 Couch $350 – $1,500 Desk $350 – $5,000 Hutch $500 – $2,100.
Can all hardwood be refinished?
The truth is, not all hardwood floors can be refinished. Although most common problems can be addressed and fixed without replacing the entire floor, there are some exceptions.
How long does hardwood last?
How long will my new finish last? On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.
How much does it cost to refinish a cedar chest?
Having your cedar chest refinished at a shop could cost you close to $600. But refinishing it yourself costs only about $100 in supplies, and you will end up with a beautiful chest that you can take pride in having restored.
How much does it cost to respring a couch?
Average Cost to Reupholster a Couch Average Cost $1,750 High Cost $4,000 Low Cost $600.
How much does it cost to repair a desk?
Typical Furniture Repair Cost Low Cost $100 Typical Cost $200 High Cost $400.
Is it better to sand or strip furniture?
Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
How do you refinish a table without sanding it?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
Can you make money flipping furniture?
Yes, furniture flipping can be profitable. Your profits are determined by your ability to source inexpensive furniture to refinish, the time and materials it takes you to refinish, and how much those pieces can ultimately sell for.
Can you Restain wood without sanding?
If the wood has been stained but not finished, DO NOT scuff or sand. Doing so will remove the color from the edges, leaving the project looking uneven. Next, apply PolyShades®.
Do I need to remove all stain before restaining?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
