Table of Contents
Altogether, you’re looking at a DIY cost to refinish hardwood flooring between $1.50 and $5.00 per square foot. Of course, the quality of materials you choose and your local tool rental prices are the biggest factors.
How much does it cost to refinish hardwood floors on your own?
Refinishing your floors yourself can cost between $500 and $1,000 depending on square footage. You can expect to pay a professional $3 to $4 per square foot to complete the same project.
Is it cheaper to refinish hardwood floors yourself?
Hiring a Professional. It may be tempting to DIY this project to save on the cost to refinish hardwood floors, but it’s more complicated than it looks. Refinishing hardwood floors is a time-consuming, messy, and costly job. On average, expect to pay from $500 to $1,000 to refinish hardwood floors on your own.
Should I refinish my hardwood floors myself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
Can you DIY refinish hardwood floors?
DIY Floor Refinishing There are two levels of refinishing hardwood floors. Buffing is the easiest. If scratches and wear are only on the surface finish and the wood underneath is in good shape, you can restore the topcoat by buffing, a process also called screening.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Can I sand and refinish my hardwood floors myself?
If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.
How much does it cost to refinish 1000 square feet of hardwood floors?
Cost to refinish hardwood floors Room size Square feet Average cost 20×20 400 $1,000 – $2,000 24×24 576 $1,200 – $2,800 Stairs (12 to 14 steps) — $300 – $1,200 Whole house 1,000 $2,000 – $4,000.
How much does it cost to sand and refinish a hardwood floor?
To completely refinish a hardwood floor—including sanding down the top layer to bare wood, then applying several coats of new finish like polyurethane—expect to pay flooring professionals $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room.
How can I refinish my hardwood floors without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
Is it worth sanding your own floors?
Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it. Once you understand the basics, a quality final result on your wood floor is more about patience than anything else.
How difficult is it to refinish wood floors?
The cost of hardwood floor refinishing can vary greatly, but the typical rate nationwide is between $3-5 per square foot. Difficulty: Refinishing floors isn’t actually difficult as long as you rent the correct equipment and study up on the process. It isn’t a project that requires special skills.
How long does it take to refinish hardwood floors yourself?
It usually only takes about 2 days to refinish hardwood floors with water based polyurethane. (Some places will do it in 1 day, but I would recommend staying away from those places…it will last longer if you allow more drying time, and each coat needs an extra 2-4 hrs to dry.).
Can I change the color of my hardwood floors?
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
Can you hand sand hardwood floors?
How to sand a hardwood floor by hand? The exact same way you would with floor sanding machines, but with a lot more elbow grease! Start with a low grit like 40, climb to 60, 80 then 100. Use a handheld orbital sander, ideally with a gear-driven setting.
Is it cheaper to refinish hardwood or install laminate?
The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.
Can you refinish hardwood floors one room at a time?
If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).
How does Sandless floor refinishing work?
Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. Finally, the technician rinses and details the floor, then applies a protective sealer to give the floor strength and shine.
How hard is it to sand your own floors?
There’s really no getting around it – sanding your floors is hard work and physically tiring. Mostly, this is down to the floorboards not being completely flat which means that the drum of the floor sanding machine won’t be able to reach all areas of the floorboards in one go.
