Table of Contents
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How much room do you need around a toilet?
Toilet Compartment Recommendations The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
What are the minimum dimensions for a toilet?
The standard dimensions of a toilet are 27 to 30 inches in depth, 20 inches in width, and 21 to 31 inches in back height. The International Residential Code (IRC) sets the required minimum dimensions of a toilet room at 30 inches by 60 inches.
How much room do you need for a toilet and sink?
Each has a minimum space allowance to pass code. A toilet requires a minimum 30 inches of space to sit in by itself: 15 inches from the center line out to each side. Sinks require a minimum of 20 inches of space to sit in, if they are the only sink in the room.
Is 2 feet enough room for a toilet?
Code minimums tend to be 21 inches. But as this allows less than two feet in front of the toilet, the NKBA recommends adding even more space: up to 30 inches, minimum.
How much space do you need for a toilet UK?
Minimum sanitaryware sizes The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
How far should a toilet be from the back wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
Are toilet bowls standard size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Toilet bowl shapes: Round toilet bowls take up less room than elongated bowls, which are usually up to three inches longer.
How far does a toilet come out?
The rough-in distance in the newer homes from the wall to the center of the toilet drain is 12-inch, while, older homes have a distance of anything between 10- or 14 inches. A wall-mounted toilet also needs a 10 inch thick wall to accommodate the flushing system.
How much space is required between toilet and vanity?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″. If you’re placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.
How far should a toilet be from a bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
Does toilet have to be on outside wall?
Chances are if you are asking yourself this question you may have been told by your builder or designer that the toilet needs to be placed against the outside wall. While there are good reasons to do so, it is not always necessary. In fact, many bathroom layouts have the toilet set against an internal wall.
Do you need planning permission for a toilet?
Planning permission is generally not required to add a bathroom into a property, assuming it is not forming part of an extension to the building. Building Regulations will most definitely apply in all cases of adding a downstairs toilet.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How far does a toilet need to be from a shower?
A minimum clearance in front of the toilet of at least 21 inches. This is required for all your bathroom fixtures, including the shower, vanity or sink and bathtub. A minimum distance from the center of the toilet to both side walls of 15 inches.
Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How do you measure for toilet installation?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
What do I need to know before buying a toilet?
While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.
