Table of Contents
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
What’s the smallest space for a toilet?
The Minimum Space Needed for a Toilet A minimum distance from the centerline of the toilet to the side wall of 15 inches. When designing a toilet compartment, you must provide a floor space that is 30 inches wide and 60 inches long.
How much space do you need between a toilet and vanity?
Toilet placement A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
How much space do you need around a toilet UK?
Minimum sanitaryware sizes The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
What is the standard projection for a toilet?
Whilst toilets with a projection (that’s the distance from the front of the pan to your wall) of between 595mm and 800mm are comfortable for most adults, generally, a toilet with a pan that has a depth of less than 650mm is considered “short projection” and intrudes less on the space around it.
How much clearance do you need in front of a toilet?
Toilets and Bidets (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
How much room do you need for a toilet and sink?
Each has a minimum space allowance to pass code. A toilet requires a minimum 30 inches of space to sit in by itself: 15 inches from the center line out to each side. Sinks require a minimum of 20 inches of space to sit in, if they are the only sink in the room.
How far away from a wall should a toilet be?
#2: The Clearance From the Center of the Toilet To Any Adjacent Fixture or Sidewall. This measurement is 15 inches. That’s the minimum (you can have more). So looking at the toilet, make sure there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall).
How small can a toilet room be UK?
You can only add a downstairs toilet if you have space. The minimum size required for a downstairs toilet is probably around 80cm x 140cm, which is what this example is, but could be as little as 70cm x 130cm in some circumstances (assuming only a toilet & hand basin are required).
How close to a wall can a toilet be UK?
If the toilet is situated on a branch drain, it cannot be upstream from the sink or shower. The minimum side distance allowed from the centre of the toilet bowl to a wall is 15 inches 12 inches to a bathtub, and clearance from the front of a bowl to a wall or fixture should be 21 inches.
How close can a toilet be to a kitchen?
Building codes require particular spacing for plumbing fixtures in a bathroom. The center of the commode must be at least 15 inches from walls or cabinets. You also need 21 inches of open space in front of the toilet. The separation between the sink and toilet must be at least 30 inches from center to center.
How good are rimless toilets?
A rimless toilet makes for significantly easier cleaning and a clear improvement in hygiene. There is no build-up of evil bacteria and no possibility for limescale to lurk. This direct flush washes the entire rimless toilet pan more efficiently and actually looks really cool when it does so.
What is a close coupled toilet?
Close coupled toilets have the cistern attached to the toilet bowl, creating one streamlined unit which combines both essential parts. The pipes are hidden within the casings of the toilet and their compact nature means they are perfect for fitting into small or awkward spaces.
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Does toilet have to be on outside wall?
Chances are if you are asking yourself this question you may have been told by your builder or designer that the toilet needs to be placed against the outside wall. While there are good reasons to do so, it is not always necessary. In fact, many bathroom layouts have the toilet set against an internal wall.
