Table of Contents
Space requirements. For a stackable washer and dryer, provide a minimum space of 40 inches deep and 32 inches wide. A side-by-side washer and dryer need space measuring at least 40 inches deep and 56 inches wide.
Will a stackable washer and dryer fit in a closet?
Yes, a stackable washer and dryer can fit in a closet. These appliances will take up at least 2×2 feet of space on the floor. However, there must be sufficient space on the sides and the back for electrical, water, and ventilation hose connections. Space is also important for optimal airflow into the dryer.
What is the rough in for a stackable washer and dryer?
Standard or typical measurements of a Washer and Dryer that can be stacked is 27 Inches wide by 38 3/4 Inches high.
How deep does a closet need to be for a washer and dryer?
Minimum space is 40 inches deep and 32 inches wide for a washer and dryer. A side-by-side washer and dryer needs at least 40 and 56 inches of space.
How much wiggle room do I need for a washer and dryer?
Front-load washers and dryers typically need 21″ – 25″ to swing the door open. Height — For top-load washers, allow at least 20″ for door clearance. If front-load models will be installed under a counter, leave 1″ of wiggle room so they’re easier to remove when necessary.
Do stackable washer dryers need a vent?
Stackable washers and dryers typically still need a vent. While they are compact and save space, most are still designed to vent to the outside. If you live someplace where venting just isn’t possible, like an apartment, don’t give up yet. You can’t make just any standard dryer ventless.
What is the standard width of stackable washer and dryer?
Most stacked washer dryers come in the standard 27-inch width size that’s the same as a standalone washer or dryer, but there are also 28-inch options, as well as slimmer 24-inch models. Typically, these units fall between 74-½” tall up to 79” in height, and 26 to 33 inches in depth.
What is the smallest stackable washer dryer width?
By definition, compact washer and dryer models are 24 inches wide. Although they take up a smaller footprint in your home, these products are just as effective as their full-size counterparts.
How close can dryer be to wall?
It’s ideal to have around six inches of space behind your washer and dryer. A periscope dryer vent can save space behind the dryer.
How do I fill the gap between my washer and dryer?
To stop this frustrating game of hide-and-seek from ever happening again, go to the home center and buy some inexpensive foam pipe insulation to fill the gap between your washer and dryer. Take the pipe and simply wedge it between the two appliances.
Is a stackable washer and dryer 110 or 220?
Voltage: Most stackable washer-dryer units require a 220-volt power outlet, which you may need an electrician to install. Some compact units, however, only require a regular, 110-volt outlet. Both are available in stackable washer-dryer units.
Is stacking washer and dryer a good idea?
Ultimately, the best washer and dryer for your home comes down to your laundry needs. A compact, stackable unit is best if you typically have small loads of laundry. Your clothes will still be exceptionally clean, and you may be able to cut down the time on dry cycles since the laundry will not be sopping wet.
Where do you put a washer and dryer in a small house?
Good locations include inside the kitchen or bathroom or directly next to one of those rooms. It will also be easier to route plumbing this way. Buildings usually stack the wet zones in a vertical line. Putting a washer and dryer in your bedroom closet wouldn’t be permitted even if there’s room for one.
What is the smallest washer dryer combo available?
Falling right between the biggest washer dryer combo and the most compact all-in-one washer dryer on this list is this LG Front-Load Electric Washer Dryer Combo (WM3997HWA) measuring 29 inches in width.
How do you vent a dryer without a vent outside?
The best way to vent a dryer without outside access is to run a vent hose through a window or to run a vent hose up through your attic space to a dryer vent on your roof. Alternatively, you can vent your dryer into your home and install a vent cover.
How do I get my washer and dryer closer to the wall?
The easiest way to get a washer closer to the wall entails cutting into the wall. For instance, you can install a recessed wall box to mount your washer water supply lines, which allows you to move the washer closer to the wall.
How much room do you need behind a dryer for a vent?
It’s ideal to have around six inches of space behind your washer and dryer.
How much space should be between washing machine and wall?
Along with measuring the dimensions of your washer and dryer, make sure to determine the height, width and depth of the laundry area to ensure a proper fit. Be mindful to account for six inches of space between the back wall and one inch of space between the appliances for side-by-side placement.
How much clearance does a dryer vent need?
The minimum clearance distance from the bottom of a clothes dryer vent terminating hood to the surface of the ground or to the surface of any other obstruction is 12″. In areas of deep snow cover that distance may be inadequate.
How do I use space above my washing machine?
Use the empty space above your washer and dyer to hang clothes. Mount a pull-out drying rack to the wall, giving you the option to keep it closed when you don’t have anything to dry. A glass container and scoop turn detergent, laundry pods or other cleaners into a decor moment.
Can washer and dryer be touching?
While the washer and dryer can touch each other and the walls on each side of the appliances, leaving at least 1 inch of space between the sides and the appliances allows you to move the appliances if necessary. You can use sliding or folding closet doors to hide the appliances when not in use.
