Table of Contents
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How much room do you need around a toilet?
Toilet Compartment Recommendations The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
What is the width of a toilet?
Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches. This is one reason why partitions around ADA-compliant bathrooms are different.
What are the dimensions needed for a toilet?
The standard dimensions of a toilet are 27 to 30 inches in depth, 20 inches in width, and 21 to 31 inches in back height. The International Residential Code (IRC) sets the required minimum dimensions of a toilet room at 30 inches by 60 inches.
How much space do you need between a toilet and vanity?
Toilet placement A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
What is the smallest space for a toilet?
Toilets and Bidets Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.).
How much space do you need for a toilet UK?
Minimum sanitaryware sizes The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
What is the footprint of a toilet?
A toilet “footprint” is basically the measurement or size of where the bottom of the toilet pedestal meets the floor.
How far from a wall should a toilet be?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
How far does a toilet come out?
The rough-in distance in the newer homes from the wall to the center of the toilet drain is 12-inch, while, older homes have a distance of anything between 10- or 14 inches. A wall-mounted toilet also needs a 10 inch thick wall to accommodate the flushing system.
How much room do you need for a toilet and sink?
Each has a minimum space allowance to pass code. A toilet requires a minimum 30 inches of space to sit in by itself: 15 inches from the center line out to each side. Sinks require a minimum of 20 inches of space to sit in, if they are the only sink in the room.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How big is a small toilet?
Compare with similar items This item GALBA Small Toilet 24.5″ Long X 13.5″ Wide X 28.5″ High Inch 1-Piece 24″ 25″ Short Compact Bathroom Tiny Mini Commode Water Closet Dual Flush Shortest Projection Elongated Concealed Trapway Sold By TinyBathrooms Item Dimensions 24.5 x 14 x 27 inches Item Shape Elongated Item Weight 90.00 lbs.
Can you have a toilet next to a kitchen UK?
As long as you provide a basin to wash your hands before re-enterning the kitchen and also provide mechanical extract ventilation to the WC room (this should be a fan that can extract a minimum 6 litres of air per second, and if the room does not have an openable window it should have a 15 minute over that could be.
How far should a toilet be from the wall UK?
If the toilet is situated on a branch drain, it cannot be upstream from the sink or shower. The minimum side distance allowed from the centre of the toilet bowl to a wall is 15 inches 12 inches to a bathtub, and clearance from the front of a bowl to a wall or fixture should be 21 inches.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How do you measure for toilet installation?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
Can you replace a 14 inch rough-in toilet with a 12 inch rough-in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
