Table of Contents
Typically, the sodium lactate is used at 1-3% of the total lotion recipe.
Can I use sodium lactate in lotion?
Sodium Lactate 60% Liquid is used in a wide variety of applications. In lotion making – since is a natural humectant, and provides moisture, Sodium lactate makes a great additive to lotions and creams, usually replacing glycerin in the recipe, or added in addition to glycerin.
How much sodium lactate do you add to cold process soap?
The recommended usage rate of sodium lactate for cold process soaps is 1 teaspoon per pound of oils. Sodium lactate is also used in hot process soaps toward the end of the cook to create a more fluid soap that easier to get into the soap mold. When using sodium lactate, add it to your cooled lye water.
How do you dilute sodium lactate?
For a 60% masterbatch that is comparable to the commercial SL liquid, mix 6 parts sodium lactate powder with 4 parts distilled water by weight. To make a 50% masterbatch, mix 1 part SL powder with 1 part distilled water by weight. Stir until the powder is dissolved.
Is sodium lactate bad for skin?
We say yes. Sodium Lactate is not only an endogenous and absolutely harmless substance, it significantly supports the NMF and helps to hydrate the skin. This makes sodium lactate an important element for good cosmetics and also perfectly suitable for certified natural cosmetics.
What does sodium lactate do for skin?
Sodium Lactate is one of the skin’s Natural Moisturizing Factors (NMFs) and the sodium salt of lactic acid. It is a great humectant because it binds water easily, but is also important in maintaining the skin’s acid mantle.
How do you add sodium lactate to cold process soap?
Usage Instructions: For cold and hot process soap, add 1 tsp. per pound of oils to the cooled lye water. (1-3% of recipe as well) For lotion, add to the water phase at 0.5 to 4 %. Sodium lactate hardens cold process soap so you can unmold and enjoy it more quickly.
What does sodium lactate do in cold process soap?
Sodium lactate is a liquid salt that can be added to cooled lye water in order to speed up unmolding time. Using sodium lactate produces harder, longer-lasting bars of cold process soap. Derived from the natural fermentation of sugars found in corn and beets, sodium lactate is the sodium salt of lactic acid.
What does sodium lactate do in soap making?
Sodium Lactate may be used as a preservative, acting as an inhibitor of bacterial growth. Sodium Lactate helps to produce a harder bar of soap that lasts longer. Because Sodium Lactate is a salt, it is a natural humectant, providing moisture.
Is sodium lactate water soluble?
Sodium lactate, a water soluble ingredient, is added during the water phase of the creation. It is used in bath products and has many beneficial aspects to its use. It is a natural moisturizer, humectant (bringing moisture to itself), and pH regulator.
Can you add sodium lactate to melt and pour soap?
The ratio I used is 1 tsp of salt per 1 pound batch of melt and pour soap. The second method I tested was adding Sodium Lactate, a liquid salt commonly used to make cold process soap harder and longer lasting. The ratio I used was 1/2 oz Sodium Lactate per 1 pound batch of melt and pour soap.
Can I use salt instead of sodium lactate in soap making?
If you don’t have sodium lactate on hand, you can also add table salt to your lye solution. Sodium lactate or table salt is especially great when the recipe tends to be a little softer (like a palm free recipe).
Is sodium lactate toxic?
Sodium lactate is non-toxic to humans and the environment and is readily biodegradable.
What is sodium lactate in lotion?
Sodium Lactate is a superior humectant moisturiser with over twice the water holding ability than Glycerin. It replenishes moisture by attracting and retaining water within the skin, preventing it from becoming dehydrated, dry and flaky.
Is sodium lactate considered natural?
Sodium Lactate is naturally derived from the fermentation of Lactic Acid. Sodium Lactate is also considered to be a natural humectant (draws moisture to itself) and is frequently used as a substitute for glycerin in lotions, creams, hair care products and cosmetics.
What does niacinamide do to your skin?
What does niacinamide do for skin? Niacinamide supports the skin barrier (the outer surface of skin), increases its resiliency, and improves texture by making pores look smaller. It also helps balance oil production, and—bonus! —it’s good for all skin types.
How is sodium lactate used as a preservative?
Sodium lactate in cold process soap The usage rate is 1 teaspoon of sodium lactate per pound of oils. More than that can result in a brittle and crumbly batch. We recommend adding it to your cooled lye water – around 130-150° F is best. Mix it gently with a stainless steel spoon and you’re ready to go!.
What is the difference between sodium lactate and lactic acid?
One Proton. The technical difference between lactate and lactic acid is chemical. To be an acid, a substance must be able to donate a hydrogen ion; when lactic acid donates its proton, it becomes its conjugate base, or lactate.
How do you keep lotion from separating?
The most common cause of a cream or lotion separating is that emulsion was not maintained during the cooling stage. It is very important to whisk your cream very frequently (once every minute or two) to ensure that all the ingredients stay emulsified until it has fully cooled.
How do you make lotion base?
Aloe-Based Homemade Lotion 1 cup aloe vera gel. 1 tsp + 1 TBSP beeswax pastilles. 1/2 cup almond oil or jojoba oil (or any other liquid oil) 1 tsp vitamin E oil (optional) 1 TBSP shea butter (optional) essential oils of choice – I like 10 drops of geranium and 5 drops of lime.
Does sodium lactate speed up trace?
Additives: Sodium lactate is often added to soaps for hardness, but it can also slow down trace. I prefer to use 1/2 tsp per pound of oils (as opposed to the recommended 1 tsp per pound of oils) to get the needed effect without making the soap crumbly. This contributes extra bubbles to the soap lather as well!.
How do I make cold process soap harder?
Here are five things that can yield a harder bar: Use a water reduction. You need to dissolve lye in water in order to turn oils into soap. Add some wax. A small amount of beeswax added to the melted oils will help harden your DIY bar soap. Add sodium lactate. Increase the olive oil. Add some salt.
How much salt do you put in a pound of soap?
Before you add the lye, add 1/2 teaspoon of salt per 1 pound of total oils used in your recipe. For example, if there are 32 ounces of oils in your recipe, add 1 teaspoon; for 48 ounces of oil, add 1 1/2 teaspoons. Stir the mixture very well to make sure that all of the salt is dissolved.
