Table of Contents
A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.
What are the signs of a bad serpentine belt?
Common signs include a squealing noise from the front of the vehicle, power steering and AC not working, engine overheating, and cracks on the belt.
How long does it take to change a serpentine belt?
It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.
How long can I drive with a bad serpentine belt?
There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.
What problems can a bad serpentine belt cause?
If your serpentine belt is failing, you may notice performance issues with your vehicle. The vehicle may frequently overheat.Bad Serpentine Belts Cause Vehicle Performance Issues Flickering lights on start up. Failure to start. Dimmed headlights. Continuously illuminated amperage light.
Can I replace serpentine belt myself?
Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.
What happens if the serpentine belt breaks while driving?
A broken serpentine belt can lead to a sudden loss of power steering in your car, making your steering very difficult to turn. A broken serpentine belt causes the water pump to stop circulating coolant through the engine’s cooling system, causing it to overheat.
How do you identify if the serpentine belt is in good condition or need to replace?
The easiest way to know that a new serpentine belt is needed is if you hear it squealing while the engine is running. A heavy rainstorm might cause a bit of squealing, but if there are any fluid leaks, it’s time to replace it right away.
What does a worn serpentine belt sound like?
Although there are a few causes of a squealing engine, one of the most common is a bad or failing serpentine belt. Belt squeaking is also especially pronounced when accelerating, on startup, and when making a U-turn. The noise is loud and sounds like a squeal, loud chirp, or squeak.
Can you start a car without a serpentine belt?
The short answer is yes, your car will start even if the serpentine belt is broken or missing. To get the car going, the battery sends power to your starter motor. However, you do need your serpentine belt if you want the car to run for longer than a few minutes.
Can a bad serpentine belt cause check engine light?
A loose or worn belt will cause ticking or rattling noises, poor engine performance and overheating, usually triggering the check engine light.
How do I know if my drive belt needs to be replaced?
Common Signs of Drive Belt Replacement Strange Noises. One of the biggest signs that you probably need to take your vehicle to the dealership for a check is when you start hearing strange noises coming from your engine. Visual Signs of Wear. Mileage Indicators. Breakage is Bad.
Is a serpentine belt the same as a timing belt?
Timing Belt. Don’t get confused—a serpentine belt is not the same thing as a timing belt. The timing belt is located inside the engine and keeps the crankshaft and camshaft in sync. This ensures that the engine intake and exhaust valves open and close in time with the pistons so the engine runs smoothly.
How often do you need to change your serpentine belt?
How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.
How much does it cost to replace a drive belt?
Once the belt starts to wear thin or breaks, it will need replacing, if those parts are going to work as they should. You will pay between $120 and $160 for this replacement job. The labor should cost about $80, while parts will run you about $60.
What causes a serpentine belt to rip?
The most serious failure is when the serpentine belt breaks completely. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.
How much does it cost to replace tensioner and serpentine belt?
The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.
How long does a serpentine belt last?
Typically, serpentine belts last anywhere from 50,000 to 100,000 miles. Over time, friction and heat break them down.
Why are my brand new belts squealing?
Belt or Pulley Misalignment Most of the components in your cars are belt-driven devices. Belt or pulley misalignment is a common issue that causes changed serpentine belts to still squealing. Misalignment means that the grooves on your belt are not aligned with the ones on your pulley.
