Table of Contents
To pressure wash stucco, make sure to use a pressure level of 1,500 PSI or below and a 25- or 40-degree nozzle. Stucco surfaces are porous and delicate, so too high a pressure can damage them. There should be at least 24 inches between the nozzle and the stucco surface.
How much pressure do you need to pressure wash stucco?
You have to find the point where the pressure will remove the dirt, grime, mold, and mildew but not damage the stucco at the same time. Stucco pressure washing is best when the pressure is between 1,500 and 2,500 PSI and if there is a first round of soap, even lower pressure is necessary.
Can you use a power washer on stucco?
Stucco is a great alternative to your standard siding, brick or stone walls. Unfortunately, the textured surface of stucco is notorious for accumulating dust and dirt over time. Luckily, the power of a pressure washer can blast the stains away and make your walls look new again.
Is Simple Green safe for stucco?
Simple Green House and Siding Cleaner is specially formulated to remove environmental pollution, dirt and grime from vinyl and aluminum siding, stucco, terra cotta roof tiles, and painted wood. It is also a perfect choice for use on shake, shingle or panel siding.
Why you should not paint stucco?
Stucco needs to breath – One of the main reasons you shouldn’t coat your stucco with paint is because stucco is porous. This allows moisture that hits the surface to easily evaporate away. A coat of paint can harm that breathability. The stucco will not bond to the paint and will crack and fall away.
Should you pressure wash stucco?
Yes, you can use a power washer or pressure washer to clean stucco. Just make sure to maintain a good distance between the nozzle and the surface, use the 1,500 PSI, and a 25- or 40-degree nozzle. Although, given the intensity of a power washer, seeking the help of a professional is always best.
Why does stucco turn black?
The black stains you see could be an accumulation of the dead, dark-colored cells of the hardy algae Gloeocapsa magma, which feeds on the calcium carbonate in the unpainted stucco mixture. But it’s easy to remove the black stains — whether they’re mold, mildew or algae — with oxygen bleach.
Is it OK to paint stucco?
So Can You Paint Stucco? The short answer is yes, you can paint stucco! You can paint any type of finish coat, whether it is a traditional (cement based) finish or when using an acrylic type of finish.
Can you soft wash stucco?
Soft washing your stucco home is the best way to remove dirt. Compared with surfaces like concrete, stucco is a fairly delicate material and can be damaged with high pressure washing. When we soft wash stucco, we rely on a custom chemical solution that is plant and animal safe.
How do you pressure wash a two story stucco house?
To pressure wash a stucco surface properly, spray detergent on to loosen the dirt build up. Then rinse off. Manually scrub rust and other stubborn areas with a soft bristle brush and wash off with a garden hose. That’s it.
Can you use oxiclean on stucco?
Oxygen bleach is a powder you mix with water. Once it is dissolved, you simply put it in a hand-pump garden sprayer and saturate the stucco. Try to work on an overcast day. Keep the stucco very wet with the solution for up to 30 minutes.
Can I use regular Simple Green in pressure washer?
A recipient of the Safer Choice label, Simple Green All-Purpose Cleaner can be used in pressure washers and on all washable surfaces, and easily removes tough dirt and grime without the use of caustic chemicals.
Can you use TSP on stucco?
TSP Solution: TSP is a great chemical that is used for many cleaning tasks, especially when prepping walls for paint and it can work great for cleaning stucco as well. A good recipe for using TSP is 1 – 2 cups of TSP to 1 gallon of water.
Is it better to color coat or paint stucco?
Color coating offers one significant advantage over painting – it lasts much longer, typically 15 years. However, color coating is more porous, so it is possible that water will get into the stucco causing damage below the surface.
How long after power washing stucco can I paint?
Moisture within the siding following power washing In a perfect world, you should wait about three to four days afterward before you start exterior painting.
Is it better to spray or roll paint on stucco?
Stucco can be painted using a roller or with an airless sprayer – a brush is not recommended. Spraying will get the paint onto the surface. Use a deep nap roller (3/4 to 1”) to work the paint into the surface and to achieve a nice uniform surface.
How long does stucco last on a house?
Most newer homes with exterior stucco have an acrylic-polymer finish, which will expand and contract with the weather. This keeps cracks to a minimum and means the stucco can easily last up to 50 years before needing to be repaired.
How do you remove mold and mildew from stucco?
To remove mold from your stucco surface, mix 5 parts water to 1 part bleach and spray it directly on the moldy part of your stucco wall. Scrub the area with a sponge and rinse the bleach with a hose. Be sure to wear gloves when mixing and spraying bleach to protect your skin from dangerous and painful chemical burns.
