Table of Contents
On a per-square-foot basis, average costs run about $3 to $8 per square foot, but these costs can vary depending on the complexity of the work and the total size of the area you want to have refinished.
How much does it cost to refinish 1000 square feet of hardwood floors?
The cost to refinish 1,000 square feet of hardwood flooring averages between $3,000 to $8,000.
How much does it cost to refinish 1500 square feet of hardwood?
Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.
How much does it cost to have your hardwood floors refinished?
On a per-square-foot-analysis, average costs of refinishing hardwood floors can range from $3.52 to $5.00. However, these costs vary dynamically with the size of the area and the complexity of the work. Notably, per-square-foot prices may be lower if your contractor will be refinishing the whole house.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Is refinishing hardwood floors worth it?
Refinish When: Things like dents and dings from heavy foot traffic or pet claws may make your floors look dull and worn, but that doesn’t mean that they have to be replaced. Simply sanding and refinishing your hardwoods should make them once more smooth and pristine without the hassle and expense of replacing them.
How long does it take to refinish 1000 square feet of hardwood floors?
In general, it will usually take 3-5 days to refinish hardwood floors with an oil based polyurethane (+ drying time), pending on whether there is a stain/how dark the stain is/how humid it is and how many coats of polyurethane you apply.
Can you refinish floors one room at a time?
If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).
How much does it cost to buff and coat a hardwood floor?
The average cost to refinish hardwood floors is $2 to $6 per square foot or $1,200 to $2,400. Refinishing hardwood stairs costs $25 to $85 per step. The cost to buff and recoat hardwood floors is $1.00 to $2.50 per square foot. DIY costs to redo and resurface wood floors yourself is $600 to $1,100.
How much does it cost to sand and Restain hardwood floors?
Average Costs for Refinishing Hardwood Floors On a per-square-foot basis, average costs run about $3 to $8 per square foot, but these costs can vary depending on the complexity of the work and the total size of the area you want to have refinished.
How long does it take to sand and refinish hardwood floors?
It typically takes between two and five days to refinish hardwood floors, depending on the type of polyurethane you use (oil or water-based), and the size and condition of your floors.
How often refinish hardwood floors?
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
Can you refinish hardwood floors without sanding?
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it’s difficult or even impossible to sand prefinished or laminated wood floors.
What is the difference between refinishing and resurfacing wood floors?
Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top.
Should I remove old hardwood before installing vinyl plank?
Most problematic is the maintenance they require and their fragile nature. No matter how well-maintained, hardwood flooring will need refinishing to restore it occasionally. If you’ve been graced with authentic hardwood flooring, it isn’t even necessary for you to remove it before installing LVT!Jan 6, 2021.
Can you refinish hardwood floors without removing baseboards?
Installing hardwood floors without removing the baseboards is possible, and it’s a suitable option for other types of flooring as well. If your baseboards have been glued to the wall and would cause damage if you tried to remove them, it may be best to leave them.
Can you refinish hardwood floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
How can I refinish my hardwood floors in one day?
Refinish Hardwood Floors in One Day: How to Refinish Wood Floors Step by Step Step 1: Buy special hardwood floor refinishing kit. Refinishing kit and other tools. Step 2: Clear the floor and clean the room. Step 3: “Sand” the floor with liquid. Step 4: Damp mop and touch up the floor. Step 5: Apply the new finish…fast!.
