Table of Contents
Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation.
How much does a 20×20 composite deck cost?
Composite Decking Cost Per Square Foot Composite Deck Quality Cost Per Square Foot Installed Average Total Cost Entry-Level Composite Deck $20 $5,821 National Average Cost $28 $8,064 Premium Composite Deck $38 $10,826.
How much does Trex cost per sq ft?
Trex Decking Cost Per Square Foot The materials cost for a Trex deck with substructure, decking and fasteners included, generally falls into the range of $9 to $16 per square foot. Options and the materials grade, however, can push this total as high as $30 per square foot.
Is Trex cheaper than wood?
An obstacle for Trex is that composites cost a lot more than natural wooden decking. By Trex’s estimates, for a 16- by 20-foot deck, the materials outlay for its Transcend line are $2,714, almost five times that of regular wood ($577).
Is there a cheaper alternative to Trex decking?
Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.
Are Trex decks worth it?
Composite decking is worth the money. It costs more upfront, but thanks to minimal maintenance costs and long life, the annual cost for the life of the fence is significantly cheaper for composite materials. If what you have in mind are the Trex decks of 15 years ago, you’d be surprised to see how far they’ve come.
How much does a Trex deck cost installed?
Cost to Install Trex Decking The cost to install Trex ranges from $5 to $15 per square foot. For complete installations that include rails, stairs and framing, expect to spend anywhere from $15 to $35 per square foot for labor, permits and other installation costs.
How many Trex boards do I need for a 12×12 deck?
(Choose from 8, 12, 16, or 20 ft board lengths. Choose which board best fits the dimensions of the deck.Decking Materials. Board length Boards required 8 FT 206 12 FT 137 16 FT 103 20 FT 83.
How many deck boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
Did Trex decking go up in price?
Today, Trex’s price hasn’t budged, but wood’s gotten almost as expensive, rising two-fold to $1,100. Put simply, a composite deck that a year ago sold at twice the price of wood now goes for just 10% more.
Is Trex hot in the sun?
Does Trex decking get hot on a sunny day? Like many other outdoor surfaces, such as concrete, asphalt, beach sand, wood decking, other brands of composite decking, etc., Trex decking can get hot due to weather and sun exposure.
Why is Trex decking so expensive?
The first reason why composite decking is expensive is that they’re not an expenditure. Composite decking materials are designed to be resistant to mold, mildew, and rot. There’s no chance of any bug damage. It may be a hefty price upfront, but it does end up saving you a ton of money in the long run.
Is Trex maintenance free?
Demand for environmentally friendly, virtually maintenance-free Trex composite decking grows every year. Demand for environmentally friendly, virtually maintenance-free Trex composite decking grows every year.
What can I use instead of Trex?
In the US Crisco is the most common brand of vegetable shortening but there are also others available, such as Earth’s Balance. Most brands of vegetable shortening should be good substitutes for Trex in recipes.
Are Trex decks slippery?
Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.
What are the disadvantages of composite decking?
Cons of Composite Decking A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. Composites aren’t natural. Composite decks aren’t completely maintenance free. You’ll need to comparison shop.
What are the problems with Trex decking?
Many Trex deck owners have complained of flaking, deterioration and even in extreme cases virtual disintegration of their Trex decks. It seems that under some conditions the coating seal placed on Trex composite decking can fail, exposing it to the elements.
Does Trex warp in sun?
Composite decking is fade resistant, but it may fade over time in strong sunlight.
How long does a Trex deck last?
Composite decking requires minimal upkeep and can last between 25 and 30 years. On average, plastic decking has a similar lifespan to composite decking and can last nearly 30 years.
Is Trex Transcend worth the extra money?
Transcend is the more expensive option overall. When it comes to a board of transcending that is 1-inch x 6 inches x 12 feet (thickness x width x height) the price begins at $61.12 for the color spiced rum. This means that you can receive nearly double the decking boards for the same price as Transcend.
What are the different grades of Trex decking?
Trex deck design comes in three types: Select, Enhance, and Transcend.
