Table of Contents
The cost of a kegerator A full-sized kegerator can run you from on average about $700.00 with all full dispense kit.
Is it worth it to get a kegerator?
When you buy a kegerator for your home, you’re not only able to conveniently store large amounts of cold draft beer, but you can also save approximately 40-60% in costs, compared to buying the same volume of beer in cans or bottles. The savings can be even greater for some brands of beers, as well as various keg sizes.
How long does a kegerator last?
If refrigerated within a kegerator that uses CO2, a keg will generally last at least 6-8 weeks before it starts to lose its fresh taste. If you store it at the appropriate temperatures, pasteurized beer will last you at least three months, sometimes as long as six months.
How much does it cost to turn a fridge into a kegerator?
Conversion kits to turn a little refrigerator into a Kegerator can cost as little as $150 or less. If you’re handy or like the idea of a do-it-yourself project that will end with a cold beer, building your own Kegerator can save you even more money.
How many beers are in a kegerator?
on the brewery, beers are kegged in various size containers, as follows: 1/2 barrel = 15.5 gallons = 124 pints = 165 12oz bottles – (Full Size Keg) 1/4 barrel = 7.75 gallons = 62 pints = 83 12oz bottles (Pony Keg) 1/6 barrel (20 Ltr) = 5.2 gallons = 41 pints = 55 12oz bottles (Sixtel).
How often do I need to clean my kegerator?
A: In commercial environments, line cleaning should be performed at least once every two weeks. For home environments that may not cycle through as much beer and have a much shorter beer line, we recommend that you clean your lines every time you switch out a keg or every five weeks, whichever is shorter.
Can I use an indoor kegerator outside?
If you’re going to use a kegerator outdoors, be sure to buy one specifically designed for outdoor use. A regular kegerator, much like a household refrigerator, is built to work best inside. That indoor kegerator could freeze up or not cool down properly depending on your outdoor temperature.
Can you put a kegerator under a bar?
YES. You must seal the gap that is created between the top of the kegerator cabinet and the bottom of the countertop. When not properly sealed, this gap will allow cool air to escape and warm air to enter into the kegerator cabinet.
What can you put in a kegerator?
Invest in a Kegerator While a kegerator can be used to dispense delicious beer, it can also be used to serve a variety of other beverages as well. These include soda, coffee, cider, and more. Take a look at everything your kegerator can do and it’s sure to be the life of the party!Aug 21, 2020.
How long does beer last in a keg?
For a properly stored keg in a kegerator, how long the beer will remain fresh will depend on the style of beer. Pasteurized beers can stay fresh from three to six months. For non-pasteurized beers, you can expect the keg to stay fresh approximately two months.
Can I make my own kegerator?
Quality ready-made kegerators are available for purchase and no DIY skills are needed, but start at around $499. There are a few basic kegerator styles you can go with if you want build your own. Kegerator conversion kits can be purchased that will fit almost any type of refrigerator or freezer you might have.
How many 8 oz beers are in a keg?
This is what most people know as “a keg,” but the half barrel name throws them off. One of these has 15.5 gallons of beer in it. That means you can get 165 12 oz. beers from it, or 124 16 oz.
How many 12 oz cans of beer are in a keg?
To recap: By standard U.S. keg size measurements, 1/2 bbl kegs total to 15.5 gallons or 165 12 oz. pours, 1/4 bbl kegs total to 7.75 gallons or 82 12 oz. pours, and 1/6 bbl kegs total to 5.16 gallons or 55 12 oz.
How many 12 oz cans are in a keg?
There are approximatly 165 cans (12oz) beers in a standard 15.5 gallon keg.
Can you leave water in beer lines?
Do not leave water in beer lines, empty keg lines by blowing and pulling water through until just air remains or fill lines with a protector. All couplers should be sanitised and attached to ring main sockets. Remove hop filters from cask lines and hang the lines off the floor.
Do you leave the CO2 on in a kegerator?
To be on the safe side, we always recommend shutting off the CO2 when you do not have a keg hooked up. However, just in case a gasket or o ring does not make a tight seal, shutting the CO2 off will prevent you from losing your CO2 while you do not have a keg hooked up.
What’s the best beer line cleaner?
As for the cleaner you choose, OxiClean works well as long as you don’t allow the lines to sit empty between kegs. If you plan to tap a new keg right after emptying the old one, then flushing with OxiClean and rinsing with hot water is probably sufficient.
