QA

Quick Answer: How Much Is A Furnace Motor

Average Blower Motor Replacement Cost Average Cost $450 High Cost $2,000 Low Cost $150.

How much does a motor cost for a furnace?

How much does a furnace motor replacement cost? On average nationwide, a furnace blower motor replacement costs $400-$600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600+.

How much should it cost to replace a furnace blower motor?

$245 – $610, Installed The average cost to replace a broken furnace blower motor is around $290 when the part is under warranty and you pay just the labor cost. When the blower motor is not under warranty, the average cost is around $450 which includes parts and labor for a standard furnace blower motor.

How do I know if my furnace motor is bad?

Signs of an Overheating Blower Motor A “hot” or burning smell from vents in the home. This symptom is often coupled with the furnace shutting off completely. Loud humming and other unusual noises. We have many homeowners call us mentioning humming and other odd sounds. Furnace cycles off and refuses to restart.

How long does a furnace motor last?

Even though the manufacturer states their blower motor will last two decades, we advise all clients to expect a 10-20-year life span due to age, use, and proactive maintenance.

How long does it take to replace a blower motor in a furnace?

It takes between 45 to 90 minutes for a HVAC specialist to: replace the blower motor, adjust it, clean the fan, test it and assemble the furnace back together. The biggest challenge if you’re doing it yourself is getting the assembly out.

Can a blower motor be repaired?

There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it’s a fairly straight forward repair.

What happens when your blower motor goes out?

You might also hear ongoing whirring noises, or noises that change or get louder if you increase the fan speed. These are all signs of problems with the blower motor. In some cases, you may even notice smoke or smells of burning while driving, in which case you should pull over immediately.

How hard is it to replace a blower motor?

If you don’t want to sweat or shiver, then find a good mechanic. The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.

How much does an ECM motor cost?

Cost to Replace a Blower Motor Low Cost $100 – $325 High Cost $600 – $1,000+ Repair Time Under an hour 1-2 hours Type PSC ECM Heat Stages One Two or Variable Under Warranty Yes No.

What causes a furnace motor to burn out?

Buildup of dust, dirt, or debris. Electrical problems, including an excessive voltage supply. Motor insulation failing prematurely due to high temperatures. A weak blower capacitor.

What does a bad blower motor sound like?

A defective blower motor will make a continuous sound noticeable by the passengers in the vehicle. It can manifest as a knocking, whirring, clunking, vibrating, squealing, or whining noise that persists until the blower motor is replaced.

What causes a furnace blower to stop working?

Sometimes the furnace blower isn’t working because the thermostat is set too low. Over the summer or more recently, someone may have accidentally lowered the thermostat temperature. Perhaps there is a wiring issue causing the blower to stop working. The motor might have a problem and requires service.

When should I replace my blower motor?

If the motor is making rattling, clanking, or banging sounds, it may be because of a loose or broken part. Loud banging sounds are especially worrisome. They’re usually a sign that something is damaged or disconnected. And this may mean replacing the blower motor.

How much is a furnace capacitor?

The capacitor stores energy to spin the motor and get it going in your furnace. The average cost to repair or replace a blower motor capacitor is $150–$450.

How long does furnace fan last?

On average, blower motors last about 10 to 20 years. The length of time that your furnace’s blower motor will last depends on the furnace’s age and how often it’s used. Every component within the furnace will have a life cycle, and blower motors are expected to last for the entire life of the furnace.

Can you upgrade a furnace blower?

When upgrading your furnace, consider adding a variable speed furnace blower motor. It can improve the efficiency of your heating system while making your home more comfortable. Single-speed blower motors function at full power or not at all, switching off and on to regulate your indoor temperatures.

Why does my blower motor only work on high?

Most car manufacturers use a series of resistors to make the heater blower motor run at different speeds. And when one or more of these resistors burn out, you’re usually left with only one heater blower motor speed—high. The resistor module is easy and inexpensive to replace.

Why is my blower motor so loud?

Loud noises you hear when your car’s heater or air conditioner are on typically indicate a blower motor issue. The good news is that a blower motor problem like this can be the result of something as simple to fix as debris or trash that got caught in it.

How much does it cost to fix a blower motor?

Cost to Replace Central or Forced Air Blower Motor Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.

How much does a furnace fan cost to run?

A standard furnace fan motor uses about 400 watts of electricity every hour. Assuming a national average of 12 cents per kilowatt-hour, let’s see how much that would cost you in the long run. If you run your furnace fan twenty-four hours a day, it will cost you a little more than $1.15 every day.

Is an ECM motor worth it?

ECM motors are expected to keep homeowners more comfortable, too. First, they provide more efficient airflow. Some homeowners may opt for repairing an old furnace, but it can be a costly decision when compared to the energy savings of replacing it with an energy efficient furnace.