Table of Contents
Some factors include how dry the wood is, the specific species in the wood, and how green the wood is. However, a standard cord of wood weighs anything from 2000 to 3000 pounds. This is the weight assuming that the wood is dried correctly, and is not greenwood.
How much wood is a full cord?
A standard, full cord of wood is a volume of 128 cubic feet, measured as a pile 8 feet long, 4 feet high and 4 feet wide. A full cord can weigh up to 5,000 pounds. Small Pickup — 1/4 ton With or without racks this truck bed holds approximately 1/2 (one-half) cord of wood. Two load tickets required.
How much does a face cord of dry wood weigh?
A face cord of kiln-dried firewood weights 1,200 pounds. This fact is one of many that makes our firewood burn bright and burn right. A regular face cord of wood 8′ X 4′ X 16″, not kiln dried will weight 400 pounds more. This means you have to burn of 50 gallons of water in the wood to get it to burn.
How much does a cord of dry oak weigh?
TABLE 1. Firewood Facts (Sorry for any gaps in the data) Species Weight (lbs./ Cord) Green Weight (lbs./ Cord) Dry Oak, Red 4888 3528 Oak, White 5573 4200 Osage-orange 5120 4728 Pine, Lodgepole 2610.
How much does a cord of pine wood weigh?
Check the price on Amazon Wood Type Lbs. per cord – wet Lbs. per cord – dry Mulberry 4712 3712 Oak, red 4888 3528 Pine, white 3600 2250 Spruce 2800 2240.
Is a cord of wood a ton?
One ton equals 2000 pounds. One cord of PINE weighs 4,300 pounds – (4,300 / 2,000 lbs = 2.15 tons) Thus, one cord of PINE weighs 2.15 tons.
What is a half cord of wood?
A half cord of firewood is 4 feet wide by 4 feet high by 4 feet deep. Historically each piece of wood in the cord was cut to four-foot lengths and the user would then cut it down to fireplace size.
How many pieces of wood are in a cord?
If you’re looking for the short answer, there are approximately 700 pieces of wood in a cord. The exact number of pieces will vary somewhat depending on how the wood is split, the level of moisture in the wood, and the particular wood species.
Can you fit a cord of wood in a pickup truck?
Consumers should be on their guard, because a pick-up cannot hold a cord of firewood. An 8-foot truck bed can hold one-half of a cord while a 6-foot bed can barely hold one-third of a cord.
Is it OK to burn rotted wood?
If a piece of wood is rotted, don’t burn it in your fireplace. Rotten wood is less dense than solid, unrotten wood. And with a lower density, it won’t produce as much heat when burned. Over time, the rotten wood will eventually degrade into nothing.
How many trees does it take to make a cord of wood?
How many trees does it take to make a cord of wood? Well, that depends, of course, on the size of the trees. Here are some examples: It would take 50 trees 4 inches in diameter, 10 trees 8 inches in diameter, or 3 trees 14 inches in diameter to make a cord of wood.
Is a face cord 1/3 of a cord?
A face cord of 16″ lengths is a 1/3 cord or 42.7 cubic feet. A face cord of 24″ lengths is a 1/2 cord or 64 cubic feet.
How much does half a cord weigh?
How Much Does A Half Cord Of Wood Weigh? The weight of a half cord depends on the type of wood and the amount of moisture content it has. With that in mind, a half cord can weigh anywhere between 1,400 to 2,500 pounds (635 to 1,133 kg), on average.
How big is a stack of firewood?
In the United States, the definition of a cord is typically a volume of 128 cubic feet—or a stack that is 4 feet wide, 4 feet high, and 8 feet long. Regulations about cord size can vary by state and country.
How much does an IBC Tote of firewood weigh?
The tote holds about 51 cubic ft, so you are looking at about 3000 pounds for live oak and around 2200 pounds for red oak.
How many cords of firewood do you need for winter?
The Size of Your House For a 1000 square foot house, you are going to need an average of 3 cords per season. If you have a large house which is around 4000 square foot house, then you’d approximately need about 12 cords for a regular winter. While for a medium sized 2000 square foot house, 6 cords should be enough.
How much does rick of wood weigh?
If we work out how to give us the weight of a single firewood rick, that means one will weigh from around 625 lbs (around 1/3 of a ton) with the lightest wood to nearly 3,000 lbs (1.5 tons) when packed with the same amount of the heaviest wood, so still pretty heavy.
How much does a oak tree weigh?
The weight of the tree log depends on its volume and density. The average estimated weight for a one-foot log with a 10-inch diameter is 29lbs (13kg) for a beech tree, 25lbs (11kg) for a maple tree, 40lbs (18kg) for an oak tree, 33lbs (15kg) for a pecan tree, and 20lbs (9kg) for a white pine tree.
How much does a cord of cedar weigh?
CORDWOOD WEIGHT CONVERSION FACTORS Species Green Seasoned Spruce 4000 3850 Cedar 3150 3050 White Oak 5850 5650 Red Oak 5500 5350.
