Table of Contents
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
How much does drywall cost per sheet?
Sheetrock and drywall costs $10 to $20 per sheet or $0.30 to $0.50 per square foot on average, depending on size, thickness, and type. Gypsum plasterboard prices are $12 to $16 per sheet. Drywall materials cost $200 to $400 to cover the walls and ceiling of a 12′ x 12′ bedroom (500 SF).
What’s the difference between drywall and Sheetrock?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How much does a 4x8x1 2 sheet of drywall weight?
A conventional 1/2-inch thick sheet of drywall measuring 4 x 8 feet weighs around 57 pounds. According to drywall maker USG, a 4 x 8-foot sheet of Sheetrock brand UltraLight Panel weighs 13 pounds less, for a total of 44 pounds.
How much drywall do I need for a 12×12 room?
You can both estimate the total square feet of drywall, also known as gypsum board, you’ll need and the number of sheets.How to Estimate Drywall or Sheetrock. Sheet Size Square Feet 4×8 32 4×9 36 4×10 40 4×12 48.
How much is drywall cost?
The average price of drywall and sheetrock is $15 per four-foot by eight-foot panel. The prices can range from $12-$20 per panel depending on where you live and where you are purchasing from. This translates into a cost of about $0.40-$0.65 per square foot of drywall.
What is the average labor cost to install drywall?
The cost to install drywall is about $2 per square foot. After material and labor are added in, the cost per panel ranges from $60 to $90.Drywall Cost Per Square Foot. Item Price Per Square Foot Materials $0.50 – $0.75 Basic Labor $0.50 – $0.75 Finishes/Texturing $0.50 – $1.50 Total $1.50 – $3.
What is a person who does drywall called?
Drywall installers are also called drywallers or hangers. They cut and hang the panels of wallboard. Tapers, also called finishers, prepare the drywall for covering by paint and wallpaper. Tapers apply paper or fiberglass mesh tape to cover drywall seams.
Which is cheaper drywall or sheetrock?
As with most name brand materials, sheetrock tends to be a bit more expensive than its non-name brand counterparts. However, many builders believe sheetrock provides a better quality product and is a bit easier to work with than generic brand drywall.
Is drywall supposed to touch the floor?
Drywall should never touch the floor. Allow for a 1/2-inch (1.27 cm) space between your new wall and your old flooring, so there is room for expansion of both materials without cracking the drywall.
Can you use 1/2-inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
How much does a 4×8 sheet of 1/2-inch plywood weigh?
A typical 4′ x 8′ sheet of 1/2-inch Hardwood Plywood weighs around 48 lbs.
How many screws go into a sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
How many 4×8 sheets do I need?
Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
How many 4×8 sheets of drywall do I need?
After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1,000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1,000 ÷ 32, or 31.25.
How do I estimate a drywall job?
Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you’re using 4-by-8 sheets) or by 48 (if you’re using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.
How much does taping and mudding cost?
The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12′ x 12′ bedroom costs $180 to $580.
How much does it cost to drywall 1000 square feet?
The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
Is drywall cheaper than plywood?
Drywall is cheaper than plywood – Most wood materials are expensive. Fixing drywall is also a lot cheaper and less time consuming than plywood. Drywall is slightly less durable than plywood, but that is reflected in the cost of the material as well.
