Quick Answer: How Much Gas Does A Gas Fireplace Use Per Hour

Table of Contents

The average price of natural gas in the US in 2020 was around $11 per thousand cubic feet ¹, equating to about $1.06 per therm. That means that a 38,000 BTU gas fireplace costs approximately $0.40 an hour to run.

Does gas fireplace use a lot of gas?

Depending on the age of a gas fireplace and its maximum heat output, a gas fireplace can use a relatively large amounts of gas if used at max settings for a number of hours per day. However, gas fireplaces be a very cost-effective form of heating, especially if using natural gas rather than propane.

Is it OK to run gas fireplace all day?

The main concern with a gas-burning appliance is the exhaust of carbon monoxide and leaving the unit on overnight is simply risky. The fact is, most gas units are safe and do not emit carbon monoxide at levels that are toxic.

How much gas do fireplaces use?

Based on the currently available models, gas log sets burn anywhere from 60,000 – 90,000 BTUs of gas per hour. On the other hand, the more efficient gas fireplaces use 10,000 – 70,000 BTUs/hour. In comparison, the average furnace requires around double the amount of gas.

Does it cost a lot to run a gas fireplace?

Gas fireplaces are pretty inexpensive to run. That’s primarily because the price of natural gas and propane are very (about $1.09 per 100,000 BTU) low compared to the price of electricity (about $3.87 per 100,000 BTU). Standard 20,000 BTU gas fireplace costs $0.29 per hour to run.

Should I turn off the pilot light on my gas fireplace in the summer?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

Can I sleep with my gas fireplace on?

An overall rule for safe gas fireplace usage is to not let your fireplace—no matter which style—operate throughout the night. Unmonitored gas fireplaces can lead to dangerous, often fatal, outcomes. The two most concerning outcomes of leaving a gas fireplace on for too long are a house fire or a gas leak.

How much does it cost to run gas fireplace for an hour?

Do gas fireplaces really heat a room?

Gas fireplaces rely on consistent combustion to produce real flames and keep the fire burning for long periods of time. Overall, gas fireplaces are highly efficient when it comes to heating a room. Once a fire has been burning for some time, it’s likely to heat a room rather quickly.

How long should a gas fireplace run?

In general, you should not run an unvented fireplace for more than three hours at a time. If you are using natural gas, you can usually run your fireplace for up to four hours before needing to refuel. If you are using propane, the limit is typically two hours.

Does a gas fire use more gas than a boiler?

While a modern central heating boiler might have an efficiency of 90%, a gas fire might only be around 50% to 60% efficient, and an open flame gas fire as little as 30% efficient or lower.

Is it cheaper to use gas fire or central heating?

Gas is often much cheaper than other sources of heating – up to 70% compared to electric fires. This is because gas has its own source, whereas electric is heated via another source. Considering its high fuel efficiency and speed at heating a large room, this makes a gas fire extremely cost-effective.

How much heat does a gas fireplace put out?

Do Gas Fireplaces Put Out Much Heat? Gas fireplaces can typically produce anywhere from around 5,000 BTUs to 40,000 BTUs, depending on the model of fireplace, but the average heat output for a gas fireplace can be between 25,000 and 30,000 BTUs.

How much gas does a pilot light use per hour?

Most pilot lights consume around 600 BTUs of gas every hour. If you leave your pilot light on for an entire day, it would roughly consume 14,400 BTU’s every day.

Should the glass on a gas fireplace be hot?

When your pilot light remains on, a small amount of heat is generated. The glass doors on your gas fireplace remain warm to the touch. If it is not cleaned properly, it could become etched into the glass. A by-product of the burning pilot light, the sulfur can continue to build upon the glass.

Will gas leak if pilot light is off?

When the pilot light goes out, it does not leak carbon monoxide gas. Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds.

Can you run a gas fireplace when power is out?

Can gas fireplaces run during a power outage? Yes! All Regency gas fireplaces, inserts, and stoves can operate safely during a power outage. The fireplace will continue to produce radiant heat and warm up the home.