Table of Contents
Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Which is cheaper concrete or asphalt?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
How much is a black top driveway?
Type of Driveway Material Cost Per Square Foot Driveway Material Cost Per Square Foot Estimate Asphalt/Blacktop $7 – $13 Gravel $1 – $3 Chip Seal $2 – $5 Heated $12 – $21.
Can you install asphalt over concrete?
It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
Does thicker asphalt last longer?
The 2-inch-thick layer of blacktop should be fine as long as the gravel base is installed correctly. Adding extra blacktop thickness will not significantly extend the life of the surface.
How wide should a driveway be?
How Wide Are Residential Driveways? Primarily, most professionals recommend that you install a 10 feet to 12 feet wide driveway. The standard driveway width for an SUV or conventional pickup truck is 10 feet. Anything less than 10′ wide will likely present difficulties for drivers, even in smaller vehicles.
How do you order asphalt?
Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved. Performing this step yields 12.5 feet times 8.33 feet times 0.42 feet or 43.7 cubic feet.
How do I calculate how much asphalt I need?
Estimate the volume of asphalt needed, using geometrical formulas and plans or measurements, including width, length, and depth (thickness). Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft3 (2322 kg/m3). Multiply the volume by the density (in the same units) to get the weight.
Can you put a garage on asphalt?
You can build a garage on an asphalt driveway as the asphalt has already been laid out. However, it is not recommended. Asphalt absorbs flammable materials and will make the garage floor a fire hazard.
What is the cheapest way to do a driveway?
Gravel and Stone Driveways A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
Is blacktop the same as asphalt?
The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.
Can I pave my own driveway?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
Can asphalt be colored?
The most effective method for colorizing asphalt pavement is to apply an acrylic based color coating. Acrylic color coatings allow for exact colors including light colors that are highly reflective. Light reflective colors may also provide LEEDS credits for reducing urban island heat.
Can you put asphalt over pavers?
You can install concrete driveway pavers over existing asphalt, although it is not recommended. Asphalt is more subject to freeze/thaw damage, heaving and cracking with extremes of temperature.
How long does asphalt take to dry?
Since asphalt needs time to harden and cure, usually 6-12 months, your parking lot or driveway will remain soft and pliable until then. You may walk on the new pavement immediately, but keep automobile traffic off of it for at least 3 full days and longer in hotter temperatures.
Why do they put asphalt over concrete?
When it comes down to it we recommend asphalt driveways over concrete for three main reasons: It has faster installation. It has better resistance to weather. It is more cost-effective.
How warm does it need to be to pave asphalt?
During initial application, the asphalt should still be at least 220 to 290-degrees Fahrenheit. If the asphalt dips below approximately 185-degrees Fahrenheit before compaction is complete, its consistency stiffens up too much to finish the job properly.
Is there different grades of asphalt?
The Asphalt Institute specifies four penetration grades: 60-70, 85-100, 120-150, and 200-300. The 60-70 grade is usually used only in pavements where traffic is very heavy such as principle city streets and very heavily trafficked rural highways.
Can you pave a driveway in the winter?
Asphalt paving projects utilize hot-mix asphalt, so it is not ideal to pave in the winter. Hot-mix asphalt must remain hot to compact and perform properly. Cold-mix cannot be paved, so it will not work for replacing an entire driveway; however, it can be used to repair potholes.
