Table of Contents
 For airless paint sprayers you can mix up to one quart of floetrol which is 32 ounces per gallon of paint.  For a brush and roll application you can mix up to 8 ounces of floetrol per gallon.  Start with 8 ounces in all applications and gradually increase the amount as needed.
What is the ratio of Floetrol to paint?
As a starting point, mix 1 part floetrol with 1 part acrylic paint. Stir slowly with a wooden stick until you reach a smooth consistency. When you lift the wooden stick out of the pouring mix, the paint should have a runny consistency.
How much Floetrol do I add to acrylic for pouring?
How much floetrol to add to acrylic paint? An excellent way is to follow official instructions and mix 1 part of Floetrol to 2 parts of acrylic paint. The best ratio for your needs depends on the paint you use, the paint consistency you want, and your experience. There are also some recipes with silicone and water.
How much Floetrol do I add to water based paint?
Add 5-10% per litre of paint. The amount depends on the consistency and flow properties of the paint. If the paint seems to thicken, add a tablespoon of water per litre of paint to thin it.
How much Floetrol do I add to latex paint to spray?
For a quart of paint, you can stick to only 4 ounces of floetrol, as it would be enough. You should not pour more than 1 quart of floetrol to 1 gallon of latex paint by any chance. Keep a constant check on the thinness of your paint. When you find the flow thin enough to be used for spray or brush, stop the pouring.
Can you use too much Floetrol?
Can I use to much Floetrol? Yes using to much floetrol can result in runs or your paint not hiding the underlying wall or material well. Â That is why it is always best to use the smallest amount possible and gradually increase the amount of floetrol you use.
How long does Floetrol extend drying time?
Penetrol will dry within 12 – 24 hours. When added to paint, the dry time may increase. No additional dry time is needed when used on bare metal. Additionally, high humidity may prolong re-coating and dry time.
What is the ratio of paint to pouring medium?
Begin mixing using these basic ratio guidelines and adjust until mixture is thin enough to flow easily off of surface when poured: fluid acrylics: 2:1 Paint to Pouring Medium; craft acrylics: 1:1 Paint to Pouring Medium; medium body acrylics: 1:3 Paint to Pouring Medium; heavy body acrylics: 1:6 Paint to Pouring Medium.
How do you dilute acrylic paint for pouring?
Acrylic paint is water soluble, meaning that it is dissolved by water. So you can understand why you wouldn’t want to add too much water. Now, you can add small amounts of water, but the absolute max that you would want to add is about 50:50 water to paint.
Does Floetrol slow drying time?
They suggested a product called Floetrol, an additive that retards drying, allowing the paint to flow better, producing a smooth finish. It made the paint easier and faster to apply and the finish is smooth as any I’ve seen. Floetrol is sold by the quart, at about $6/per.
Can you use Floetrol with a roller?
Floetrol minimises and often eliminates brush marks, reduces orange peel effect when using a roller and helps keep a wet edge to reduce lap marks.
Can I use Floetrol with primer?
Mix Kilz Latex Primer with water to dilute thinner. Mix Floetrol with the top coat Latex for smooth cover no brush marks.
Is Floetrol being discontinued?
Latex paint additive Flood Floetrol is discontinued.
Does Floetrol ruin paint?
Absolutely. Floetrol is an additive for water based paint only.
Does Floetrol create cells?
Floetrol – This paint conditional works great as a pouring medium. It has a medium consistency and does tend to create cells. Water – Paint thinned slightly with water only can help create small cell activity. You can’t use too much as it will cause there to be not enough binders in the paint and it will crack.
Can Floetrol be used as a glaze?
Floetrol is formulated for wall paint and is used as a glaze.
Can Floetrol be used with polyurethane?
Can I Thin Water Based Polyurethane with Floetrol? Yes, you can thin water-based polyurethane using Floetrol however there is now a risk your water-based poly can turn yellow over time. Floetrol is designed for latex-based paints and is meant to improve flow when applying using a brush or roller.
What can you add to latex paint to make it dry slower?
Thinning latex paints with water can reduce their durability, use Acriflow and your paint will last longer and apply smooth and easy! Acriflow is ideal for faux finishes.It is used to slow down the dry time of latex paints during hot or windy drying conditions.
How do you mix Floetrol with acrylic paint?
Step-by-Step Guide Mix 1 part Floetrol with 2 parts acrylic paint. Stir the mixture thoroughly. Add in 2-4 drops of liquid silicone. Stir the mixture thoroughly. Repeat steps 1-4 for each paint color, using a separate container for each color. Now, pour the colors you want in the painting layer by layer in one plastic cup.
What is the difference between Floetrol and pouring medium?
Sold in an easy-pour 1-quart bottle, Floetrol is a less costly alternative to Liquitex. It performs nearly as well, and possibly just as well, but is less archival. Unlike Liquitex’s pouring medium, this one leaves a matte finish, which may be more appealing to some artists.
Can you mix Floetrol and Liquitex?
As an expert pourer, you can certainly appreciate the combination of Liquitex and Floetrol. But when you’re starting out, the Floetrol by itself is functionally the same. As you become more experienced and start to tweak your formulas, you may find that you want to add something else to the mix.
