Table of Contents
How many square feet will 5 gallons of Drylok cover?
5 gallon can. Coverage 375-500 Sq. Ft.
How much will a gallon of Drylok cover?
A. Both DRYLOK® Original Masonry Waterproofer and DRYLOK® Extreme Masonry Waterproofer cover 75 – 100 square feet per gallon, and DRYLOK® Floor & Wall Masonry Waterproofer covers 90 – 100 square feet per gallon, depending on the porosity of the surface.
Is one coat Drylok enough?
From there, I proceeded to clear the area. Next, with no obstructions in my way, I thoroughly cleaned the concrete surfaces to which I would apply the waterproofing treatment. Note that one gallon of DRYLOK Masonry Waterproofer is enough to cover 75 to 100 square feet of surface area with two coats.
Is there anything better than Drylok?
basement would require more than 10 gallons of Drylok (and remember it won’t work on the floor). per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run.
How much does a 5 gallon bucket of Drylok weigh?
66 Pounds Material Water Based Brand Drylok Color White Item Weight 66 Pounds Item Dimensions LxWxH 12 x 12 x 15 inches.
What’s the difference between Drylok pro and Drylok extreme?
DRYLOK Pro is an exclusive product offered through Lowe’s. DRYLOK Pro offers mold and mildew resistance, stops water under hydrostatic pressure and water entering by wind driven rain. The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color.
How do you remove Drylok from basement walls?
Use a sander to make tough areas more porous before trying a second coating. Use a sharp putty knife to help break up large swaths of Drylok. Brush on another coating of solvent and let it sit for 45 minutes before attacking the Drylok again with the pressure washer.
Can you apply Drylok with a roller?
Stir DRYLOK® Extreme Masonry Waterproofer thoroughly before and during application — do not thin. Apply the first coat to bare masonry with a three-quarter-inch nap roller, a DRYLOK® Brush or a quality nylon bristle brush. If using a roller, back brush the first coat to fill all pores and pinholes.
Can you Drylock a basement floor?
In addition to garage floors, basement floors, brick patios, poured concrete and block patios, and wood steps, DryLok can also be used on concrete floors. These surfaces can be beautified and prolong their life with this product.
Should I paint my basement walls with Drylok?
For maximum protection, I opted for DRYLOK Extreme. Recommended for the most demanding conditions and capable of resisting the hydrostatic pressure equivalent to a 33-foot-tall wall of water, DRYLOK Extreme does what other, broadly similar products do, only better.
Should you Drylock basement walls?
DO NOT PAINT YOUR WALLS, even with Drylok or waterproofing paint. Also, do not attach insulation directly to the foundation walls. It behaves as a moisture trap and can also hide structural problems and cracks in the foundation. Bottom line: basement walls need to breathe too.
Can you paint DRYLOK Fast Plug?
DRYLOK® Fast Plug® may be painted when set with DRYLOK® Original Masonry Waterproofer , DRYLOK® Extreme Masonry Waterproofer, DRYLOK® Powdered Masonry Waterproofer or DRYLOK® Concrete Floor Paint. For Inactive Leaks, Patching, and Anchoring: thoroughly soak the area to be patched.
Which is better Kilz or Drylok?
Which Is Better Kilz Or Drylock? Original Dryloks are designed to withstand 10 lbs of pressure, while Drylok Extremes are designed to withstand 15 lbs of pressure at hydrostatic pressure. The KILZ water pressure monitor has a rating of 5 stars on Amazon and is rated at 12 PSI.
Does Drylock prevent mold?
Does Drylok prevent mold? Yes, Drylok helps to prevent the development of mold and mildew because it is designed to prevent water from penetrating through foundation walls. The product provides an ‘inert coating’ which means it does not promote the growth of mold or mildew.
Can I use Drylok on drywall?
Can Drylock Be Used On Drywall? The products are not designed for interior use. If you were to use paint, you would not have to worry about the paint wearing out since there would be off gasses not intended for a confined area. If you’re going to use a damp environment, you should use a kitchen and bath enamel.
Is Drylok low odor?
DRYLOK Latex Base Masonry Waterproofed is a low-odor waterproofing paint formulated to protect any interior, exterior, above- or below-grade masonry surface.
How much does it cost to Drylok a basement?
Cost to DRYLOK a Basement The cost of using DRYLOK to seal a basement averages $0.60 to $1 a square foot. DRYLOK is a basement sealant material.
How much does a 5 gallon bucket weight empty?
A five-gallon bucket weighs one pound. This is for a standard or average five-gallon bucket that is empty of any other items or materials.
Does Drylok extreme smell?
A new latex-based waterproofer from the manufacturers of Drylok, one of the best-known basement-wall paints, eliminates much of the odor while retaining Drylok’s sealing ability. Odor is important to consider because basement walls generally are sealed from the inside and ventilation frequently is poor.
Is Drylok pro Tintable?
DRYLOK® PRO Basement & Masonry Waterproofer comes with a Fully Transferable 18-year warranty. Extensive tintable color pallete makes DRYLOK® PRO Basement & Masonry Waterproofer a one-step solution for waterproofing and beautification. For use on basements, stucco, masonry pools, cinder block, poured concrete, and more.
How good is Drylok paint?
5.0 out of 5 stars Great Product! The product went on smoothly, very little odor and has a nice bright white finish. I only had 3/4 of a can left from the spill in delivery.
