Table of Contents
3. Soffit Costs Materials $1 – $3 per linear foot Labor $1.50 – $3 per linear foot Repair $6 – $12.50 per linear foot.
How much does it cost to install soffits?
Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.
What is the labor cost to install soffit and fascia?
The labor cost to install fascia is between $6 and $20 per linear foot. The average one-story home will need 300 linear feet of soffits, which would require between 11 and 13 active labor hours costing $800 to $1,400 total. The labor cost to install soffits is between $1.50 and $3 per foot.
How do you calculate soffit?
Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.
How often should soffits be replaced?
Just like the other parts of your roof, they are constantly being exposed to damaging wind, humidity, sun, rain, and critters. It is a good idea to get in the habit of inspecting your fascias and soffits twice a year.
How much does it cost to wrap soffit and fascia?
Professionally installed soffits and fascias typically cost $6-$10 a linear foot for wood or vinyl, and $8-$20 or more a linear foot for aluminum, but costs can be more in some circumstances — for a multi-story home with a high roofline, if the soffits are wider than the common 12″-16″ or if there are a lot of mitered.
What is interior soffit?
A soffit is an exterior or interior architectural feature, generally the horizontal, aloft underside of any construction element. Its archetypal form, sometimes incorporating or implying the projection of beams, is the underside of eaves (to connect a retaining wall to projecting edge(s) of the roof).
How long does it take to install soffit and fascia?
Working alone, you can clad the soffits and fascias on a 1,200-sq. -ft. house in about five days. Get a volunteer to cut and hand you up materials and you’ll really move along.
Can you paint soffits?
To paint your home’s soffits and eaves, you’ll need to spend between 1 and 2 hours for every 25 linear feet. Before you begin, make sure the exterior has been properly prepped. That includes scraping, repairing, and priming damaged wood, and cleaning the surface thoroughly.
How much should I charge to install vinyl soffit?
The national average materials cost to install a vinyl soffit is $1.56 per linear foot, with a range between $1.24 to $1.88. The total price for labor and materials per linear foot is $6.46, coming in between $4.82 to $8.11. A typical 25 linear foot project costs $161.62, with a range of $120.46 to $202.77.6 days ago.
How wide should a soffit be?
While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.
What is the standard length of soffit?
If your kitchen ceiling is 8 feet tall, leave a soffit space no less than the standard 12 inches used in most homes.
Are soffits easy to replace?
Don’t worry, replacing soffit and fascia boards is actually rather simple, and can be done by anyone with rudimentary DIY knowledge and experience.
What causes soffit damage?
The most common causes of soffit and fascia damage are water and sun exposure. Being exposed to these elements for long periods, soffit and fascia boards may end up with wet or dry rot. If you have vinyl soffits, they may sustain cracks due to physical damage or freeze/thaw cycles.
What is the difference between a soffit and a fascia?
The soffit is part of the overhang where your roof meets your siding. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline.
What’s the average cost to install aluminum soffit?
The national average materials cost to install an aluminum soffit is $2.58 per linear foot, with a range between $2.06 to $3.11. The total price for labor and materials per linear foot is $10.36, coming in between $6.86 to $13.87. A typical 100 linear foot project costs $1,036.38, with a range of $685.90 to $1,386.85.
How do you replace soffits?
Soffit and Fascia Repair Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. Remove Rotted Fascia. Remove the rotted section of fascia. Remove Old Soffit. Pull down to remove the old soffit. Remove Rotted Rafter. Attach Cleat. Attach New Rafter. Seal Replacement Soffit. Attach Replacement Soffit.
How much is metal soffit?
What Is The Price Of Metal Soffit Panels? The typical price range of metal soffit panels when the metal industry is stable is $2.00- $4.00 per square foot for material.
