Table of Contents
The average price is around $300 per pallet or $0.60 per square foot. Sod is also sold by the square yard and roll, but those options are not as common.Sod Cost by Size. Unit of Measure Price Range Notes One-Half Acre $7,490 – $20,825 One-half acre = 21,780 square feet Acre $14,900 – $40,340 1 acre = 43,650 square feet.
How many pallets of sod do I need for 1 acre?
Typical Quantity of Sod on Pallets Check with suppliers to determine the square yardage of their pallets. Converting 50 to 75 square yards to square feet requires you to multiply the numbers by nine. So pallets will yield 450 to 675 square feet of sod or cover approximately 0.01 to 0.015 acres.
Is sod worth the money?
Sod – Simply put, sod is the most expensive option because you are essentially paying someone else for time and materials of growing the grass. And, it is dramatically more expensive than seed. If money is no problem, sod may be the winning choice for reasons you’ll see below.
How much sod is on a pallet?
Keep in-mind: A pallet of turf grass covers approximately 450 square feet of lawn. Contact us for the most accurate measure.
Can sod be laid over existing grass?
People often think that laying sod over an existing lawn makes sense and saves time. In fact, laying fresh sod over an existing lawn is no shortcut and could kill your sod and cause you twice as much work. Removing your old lawn before laying new sod is crucial for a healthy root system.
How much sod will I need?
To figure out how much sod you need, measure out the area; get the length in feet and the depth in feet. Multiply these 2 numbers together to get total square feet. Divide this number by 9 to get square yards. Sod is sold by piece and by square yard (which is 2.25 pieces).
Is hydroseeding cheaper than sod?
Hydroseeding is much less expensive than installing sod. “Hydroseeding costs an average of $1,000 for a 5,000-10,000 square foot lawn, though homeowners could pay anywhere from $500 to $4,000 depending on the size of their yard and quality of the mix.
Should I do sod or seed?
Sod – No question, if you need a nice lawn right away, sod is your hero. Seed – It takes a lot longer to grow a dense, lush lawn so if time is a factor, seed may be the losing option. If you’ve got time to tend the lawn, and can wait until the optimal growing season, seed is worthy of consideration.
How long does sod take to root?
Your new sod should root within 10-14 days of application. This is also when you should mow your new lawn for the first time after laying sod. Be sure to set your mower to the highest setting possible in order to avoid cutting it too close to the root.
How do you prep for sod?
How to soil prep for sod Step 1 – Clear The Area. The first step to creating a great lawn is removing weeds, rocks, and debris. Step 2 – Remove any existing grass. Step 3 – Establish a Rough Grade. Step 4 – Soil Preparation. Step 5 – Install a Sprinkler System. Step 6 – Fine Grading.
How long does it take one person to lay a pallet of sod?
One pallet (600 square feet) generally takes 1 person approximately 1-1 ½ hours to install. Hard to access areas and those requiring a lot of cutting will take longer.
Can I just throw grass seed on my lawn?
Can you just sprinkle grass seed on top of your existing lawn? While it’s possible to simply sow the new grass seed over your existing lawn, taking the time to prepare your lawn beforehand will increase the likelihood of seed germination and improve your end result.
How do you stop weeds from growing on new sod?
Consider a selective post-emergent herbicide in a spray bottle or tank sprayer with a controllable stream; this way, you can easily spot-treat the weeds in your new sod. Pre-emergent herbicides prevent weeds from growing, but if you lay sod in spring or fall it may be too late to use this kind of herbicide.
How thick is the sod?
The standard thickness is 1 inch. Some sod suppliers will provide sod rolls that are 4.3 feet in length by 2 feet, not 9 square feet. Others will provide 1.5 width by 6 feet in length. Thicknesses may vary depending on the soil composition and harvesting technique.
How do you quote a sod job?
Expect to pay between $0.30 to $0.83 per square foot of sod. If you’re skipping the DIY route and want professional sod installation, most sod installers charge an additional labor fee between $0.57 to $0.93 per square foot. You can expect to pay between $0.87 to $1.76 per square foot for both labor and materials.
How do you calculate turf?
How to calculate the turf required depending on the shape of the area: Measure the length (L) and width (W) of the square or rectangular area. To calculate the amount of turf you need in square metres, multiply the length by the width. For example: Length is 10m and width is 5m, so 10m x 5m = 50sqm.
How do I calculate how much grass I need?
Walk the length of your lawn, figuring that one pace equals about 3 feet. Do the same with the width of the lawn. Then multiply the length by the width to arrive at the total. Make sure you subtract the square footage of your home and driveway when calculating the total square footage of your lawn.
