Table of Contents
Clear LEXAN 9034 Polycarbonate Sheet Stock Description Price 43041 0.375″ (9.5mm) x 12″ x 12″ Clear LEXAN ™ 9034 Polycarbonate Sheet $21.99/Sheet In Stock $21.99/Sheet In Stock 43042 0.472″ (12.7mm) x 12″ x 12″ Clear LEXAN ™ 9034 Polycarbonate Sheet $29.35/Sheet In Stock $29.35/Sheet In Stock.
Is Lexan cheaper than plexiglass?
When it comes to cost, Plexiglass is usually cheaper than other materials, including Lexan.
Is Lexan cheaper than glass?
Owing to its ideal strength, Lexan is worth 35% more than acrylic glass but it is still much cheaper as compared to the standard glass.
What size sheets does Lexan come in?
Polycarbonate LEXAN sheet comes in the following standard sizes: 48” x 96”, 60” x 96”, 72” x 96”, 48” x 120”, and 60” x 120”. You can select the quality of thickness from the following range: 0.03” to 0.5”. Bullet/Blast/Wind Resistant Security Glazing is available as well.
How clear is Lexan?
In addition to colorless (clear), Lexan™ 9034 is available in solar gray and bronze in thicknesses from . 080″ to . 500″.
Does Lexan scratch easier than plexiglass?
Lexan has the higher impact resistance of the two and will (in most cases) bend rather than crack. Besides being less inclined to discoloration, Plexiglass is more scratch-resistant and tends to be the less costly, but is does not have the same strength as Lexan.
Does Lexan turn yellow?
It depends on climate and whether the Lexan was treated or coated for UV exposure. There are greenhouses that go far more than 10 years and they aren’t yellow. For untreated Lexan the yellow is on the surface and can be polished off.
How long does Lexan glass last?
While Lexan might last for 15 years, safety glass has a longer lifespan. Even though Lexan serves as a great defence against UV radiation, over time it turns yellow. This also ultimately reduces its effectiveness.
How thick does Lexan have to be to stop a bullet?
Not only must the ballistic glass be thicker–at least 1.625-inches thick, if not 1.75–it also needs to be of an entirely different composition. The only bullet resistant glass that’s going to stop a .
What do you clean Lexan with?
Wash Lexan™ Sheet with a mild soap or detergent (e.g., Joy** dishwashing liquid) and lukewarm water using a clean sponge or a soft cloth. Rinse well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots.
Can you drill holes in Lexan?
It takes a special drill bit to properly drill through Plexiglas, Lucite, Acrylite, or Perspex acrylic sheet. Ideal for Lexan, Tuffak or Makrolon polycarbonate sheet. When drilling holes for screws, you must make the hole larger than the screw itself to allow for expansion and contraction of the material.
Does Lexan scratch easily?
It is highly resistant to acids and chemicals, such as gasoline. It has a low level of flammability, which is essential in certain industries. LEXAN polycarbonate is also available in a variety of flexible (film) grades. The cons of LEXAN are that it is easier to scratch, and minor scratches cannot be polished away.
How thick can you get Lexan?
In addition to colorless (clear), Lexan 9034 is available in solar gray and bronze in thicknesses from . 080″ to 1/2″. Lexan 9034 uncoated polycarbonate sheet is the standard grade of Lexan sheet for general purpose applications.
How thick should Lexan windows be?
It may help you to know that Lexan is a brandname and the material is actually polycarbonate. It comes in various thickness from . 090″ on up but 1/4, 3/8,and 1/2 inch are the most common. Polycarbonate can be purchased with a coating for abrasion resistance called Marguard.
Is Lexan expensive?
Lexan does have its drawbacks, however. It’s much easier to scratch and much more expensive than acrylic. It’s also not as transparent as acrylic, and it can be yellowed over time by UV rays from the sun.
Can Lexan be bent?
Lexan Sheet can be cold bent and can bend to tighter curves than polymethyl methacrylate, Acrylic. Bending Lexan sheet is easy because of its excellent flexibility factor. It can easily be formed, and formed, and reformed.
Which is stronger plexiglass or Lexan?
While Plexiglas is 17 times stronger in terms of impact resistance than glass, Lexan is 250 times stronger. Therefore, if you are searching for a material that has maximum strength, Lexan fares far better than Plexiglas.
Can you remove scratches from Lexan?
What is the easiest and most effective way to remove scratches from plexiglass, lexan, and acrilic ? 80 grit is gonna be hard to get out, but generally speaking 600 grit, 1000, 1500, 2000, then 3m rubbing compound or novus scratch remover and you’ll be polished back out to crystal clear again.
How strong is Lexan?
Lexan is an extremely strong material that is almost unbreakable. Safety glass is not as strong. Tempered safety glass has an impact strength that’s five times higher than “normal” annealed glass of the same thickness, while Lexan has an impact strength that’s 250 times that of annealed glass.
What is the difference between polycarbonate and Lexan?
Yes, they are the same thing. Lexan™ is actually a brand name of polycarbonate manufactured by Sabic Innovative Plastic.
Is Lexan a plastic?
Lexan is a polycarbonate resin thermoplastic. This strength and flexibility has made Lexan sheet an indispensable material for a wide variety of manufacturers, as very few materials can claim Lexan’s transformative ability along with its outstanding heat and impact resistance.
Is Lexan stronger than glass?
Sheet grade polycarbonate (aka Lexan or Makrolon) and acrylic sheet (aka Lucite) are two of the most frequently used see-through plastics. They are both stronger and lighter than untempered glass; acrylic is 4x to 8x stronger than glass, while polycarb is about 200x stronger.
How much weight do Lexan windows save?
Re: Lexan/ Plastic windows, how much weight is saved?? Weight savings with 3/16″ is exactly 50%. Just put it in your non passenger windows. Its not really a safety thing at that point.
Can you use Lexan for a windshield?
If you are needing material that has an attractive aesthetic but is also strong and unbreakable, then LEXAN Polycarbonate is a great choice. A LEXAN windshield is a popular choice.
