Table of Contents
The average car requires roughly 250 square feet of vinyl to cover its entire surface. With this in mind, the standard DIY car wrap will run you approximately $500-$750 in vinyl costs. These prices will vary depending on the vinyl brand, the vinyl retailer, and the color and design of the wrap.
Is it cheaper to wrap a car yourself?
So to recap: Just for the most basic tools you’d need to wrap your car, you’d be looking at spending between $160 and $500 or more. The only time it may be worth the investment to purchase your own tools and do the job yourself is if you plan on changing the look of your car every couple of months.
How much does it cost to wrap your car yourself?
To vinyl wrap a vehicle yourself, you will need the vinyl itself, which varies in price significantly depending on Size, Brand, Color, and Finish. On average, to wrap a vehicle, you will need to purchase a 5-foot x 60-foot vinyl roll to wrap most size vehicles, which can cost anywhere from $200 to $800 on average.
Is it better to wrap your car yourself?
Going the professional route, vinyl car wrapping can cost as much as a paint job, but patience and a steady hand can make even a full car wrap go smoothly for a do-it-yourselfer. In fact, the tools required are easily accessible and require no special licenses, training, or experience.
What tools do you need to wrap a car?
Tools Needed to Vinyl Wrap a Car Heat Gun. Squeegee. Cutting Blade. Cutting Tape. Cleaning Solution. Measuring Tape. Gloves. Infrared Thermometer.
How much vinyl is needed to wrap a car?
Small size cars can be fully wrapped with 50 to 55 feet / 15 to 16.8 meters of vinyl. Midsize cars can be fully wrapped with 60 to 65 feet / 18.3 to 19.8 meters of vinyl.
Is it cheaper to wrap or paint a car?
An inexpensive paint job is usually cheaper than a car wrap. A higher-quality paint job with multiple coats will cost about the same as a car wrap. If you want a matte finish or a color-shifting paint, painting your car would cost significantly more than wrapping it to achieve the same look.
How much does it cost to get your car wrapped in one color?
Depending on the vehicle, a color change can range from $2500 – $3500 for a regular car or $3500 – $5000 for a truck or SUV.
How much does it cost to wrap a car vs paint?
Paint jobs run from $500 (low quality) or anywhere between $1,000-$5,000 (high-quality). A professional wrap runs between $2,500 to $5,000. There is also a labor cost to remove the wrap that may range between $500-$600.
What are the pros and cons of wrapping a car?
Pros and Cons of Wrapping a Car Car Wraps are Customizable. Vehicle Wraps Protect Your Paint. Vinyl Wraps are Removable. Car Wraps are Cost Effective. Vinyl Wraps Offer Minimal Downtime. Vehicle Wraps Come in a Range of Options. You Get What You Pay For. Drastic Colour Changes.
How long does it take to wrap a car?
Figuring Out How Long a Wrap Takes There are many steps in the wrap process, but it can generally be completed in entirety in as little as a few hours and a week at the most. The wrap application only takes a couple hours for partial wraps and generally two days at most for a full wrap.
How much does vinyl wrap cost?
Wraps are priced using a combination of square footage, complexity and (if required) design services. An average full wrap on a vehicle can range from $1,500 to $3,200 depending on the amount of square footage and services required.
Do you need a heat gun to wrap a car?
You must use a heat gun! Must also use an infrared thermometer in unison with the heat gun to be able to measure the vinyl’s temperature during the post-heating process. Most vinyl will lose memory around 180 Fahrenheit (90 degrees Celsius) Once it reaches that temperature the memory dies.
Do you need gloves for vinyl wrap?
Glove. The gloves prevent any hand or finger prints being left on the vinyl film and they allow the installer’s hands to glide smoothly across the wrap. They also provide protection to the installer’s hands against any heat from the heat gun.
Can You Use soapy water to apply vinyl wrap?
After cleaning your surface area, wet the area again using a spray bottle and a solution of about 5% soap / 95% water. Apply the sticker while the area is still wet. The soapy water will dry in a few minutes and leave your sticker firmly affixed.
Can you use Cricut vinyl to wrap a car?
Cricut vinyl is another strong vinyl that can be used outside and on cars. While this is a craft vinyl, it’s still very hard wearing. We have used Cricut permanent vinyl on many, many mugs and cups. If you want a decal wider than that we recommend you go with the Oracal or Siser vinyl.
How do I know how much to wrap my car?
The easiest way to calculate how much vinyl you need, is to take the length of your car, multiply by 3 and add 10 to 15 feet, round it up to the nearest roll size you can buy. Measure your car for all the areas you want to wrap with vinyl film. Always add extra for the edges, so you have somewhere to grab the material.
How many square feet is my car?
To effectively measure the interior of your vehicle, we recommend using a tape measure to capture the length and width (in feet) of any surface where material will be placed. Multiply length X width to get the square footage needed for each part of the car.
Is it better to paint a car or wrap it?
A vinyl wrap is the medium of choice for vehicle advertising because it costs much less than a custom paint job, and it offers significantly more design and finish options than paint. But with prices so reasonable, wraps are now becoming the preferred method of “repainting” for private vehicle owners, as well.
Which is better vinyl wrap or paint?
Because vinyl wrap is laminated, it is not as susceptible to UV rays as is paint, thus reducing fading over time. In addition, the thickness of the vinyl minimizes the chances of chipping or scratching, both of which are common perils with standard paint. Unlike paint jobs, vehicle wraps do not require waxing.
Is it easier to wrap or paint a car?
Vehicle wraps are more affordable than custom paint jobs but are also easier thanks to customization, ease of redoing the design, ease of repair, and much more.
