Table of Contents
The cost to replace garage door springs ranges in between $180 to $350 for an expert to do the job satisfactorily. The cost includes the torsion and extension springs’ cost ($10 to $100), labor cost (in between $40 to $70) depending on region and a company. The price for replacing may vary based on the types of door.
How much does it cost to replace a torsion spring on garage door?
Replacement torsion springs cost $30 to $100 each, and replacing them will cost $75 to $150 per spring, including labor and materials. Top-rated garage door repair experts are here to help.
Can I replace garage door spring myself?
You can definitely replace garage door springs on your own, but it can be a bit tricky and dangerous, and the skill required depends a lot on the type of springs that you have.
How long does a garage door spring last?
How long do garage springs last, typically? The average garage door spring, if correctly installed, should last about 10,000 cycles of opening and closing. If you only go in and out of your garage once a day, that means you should expect a broken garage door spring around 14 years after the spring is first installed.
How long does it take to replace garage door springs?
Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.
Can you manually open a garage door with a broken spring?
If your garage door has a broken spring and you must take your cars out of the garage or open it for any reason, the best and safest thing to do (although not recommended) is to open it manually. Use Extreme Caution! Disengage the door from the opener, and carefully lift the door up.
Should you replace both garage door springs at the same time?
When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.
Can you open a garage door after the spring has broken?
Garage doors with broken springs should not be opened. Doors in this condition can be difficult to lift because the garage door opener loses the support springs provide in lifting and lowering the door. We don’t recommend attempting to open a garage door with a broken spring but sometimes it’s an absolute emergency.
How can I make my garage door springs last longer?
How Can You Make Springs Last Longer? Keep rust and corrosion at bay. Regular lubrication plays a big role in preventing rust and corrosion, but it has to be done with the right lubricant. Keep your garage door properly balanced. Keep road salt out of your garage. Keep up with regularly scheduled maintenance.
Why do springs break on garage doors?
The springs on your garage door system are responsible for the heavy lifting. When the garage door is lowered, the springs gain tension. When raising the garage door, tension is released and the spring assists with the lifting. As a result, most garage door springs break when the door is down.
How do I know if my garage door springs need to be replaced?
Signs of a Broken Garage Door Spring The top half of the door appears misaligned. The door opens a few inches and then slams down again. The cables attached to the springs are dangling. The door seems to be off track or crooked.
How many times do you wind a garage door torsion spring?
A rule of thumb with springs is that four quarter turns equals a full revolution and the spring needs to be tightened a full revolution for every foot of door height (e.g. 7-1/2 foot door = 7 revolutions +2 (30 quarter turns).
How much does it cost to replace cables on a garage door?
Garage door cables cost around $15 each and $30 for the pair. We recommend getting cables installed or replaced by a professional door company, so you would include the service/installation fee. The total amount you should spend on replacing cables should be in the range of $90 to $115.
How many springs should a garage door have?
As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.
Why does my garage door have 2 different springs?
Doors with extension springs should always have two springs. The pair work together to provide a counterweight to the door. If one of your garage door springs breaks or is in poor condition, replace both springs. In order for the springs to provide a balanced lift, both must provide equal strength and support.
Are garage door springs necessary?
These springs are essential for opening and closing your garage smoothly, especially if you have two. This means that you shouldn’t use your garage door opener without any springs since residential openers don’t typically have much horsepower.
Can I put bigger springs on my garage door?
If your garage door springs have lasted less than five years, or if you plan to live where you are for many years, you may want to try the extra long life torsion springs. By using larger springs, you can, in most cases, quadruple your spring life while only doubling the cost of the springs.
