Table of Contents
How much does it cost to remove and replace deck boards?
Most deck owners can expect to pay between $5 and $10 per square foot for removing decking. Multi-story decks, decks featuring intricate deck board patterns and layouts, or those outdoor spaces with heavy components like metal railing; deck board removal pricing can be higher.
How much does it cost to replace a deck board?
Replacement boards cost an average between $8 and $11 per square foot.
Can you just replace deck boards?
If your existing deck is old, shabby and a maintenance nightmare, you don’t have to tear it all down and start over. Chances are that the structural parts are still in good shape. If so, you can simply remodel it with new decking, rails and stairs, and save tons of money over the cost of a complete rebuild.
How much does it cost to replace a 12×12 deck?
An average 12×12 deck that consists of 144 square feet costs between $720 and $1,440 to remove.
When should deck boards be replaced?
A typical wood deck can last anywhere from 15 to 40 years. This will depend on the materials used and the quality of routine maintenance performed. However, if your deck is showing signs of age and is over 20 years old, you should begin considering a deck replacement.
How do you estimate a decking job?
The average cost to build a deck is $25 per square foot with most homeowners spending between $4,380 to $10,080 total. An entry level deck with basic materials costs $15 per square foot, while a deck built with premium materials costs $35 per square foot.
How do you replace deck boards on an existing deck?
Installation tips Cut out the bad part of the board. Cut the section of bad board free from the joists at both ends with a jigsaw. Pull the nails and remove the board. Pull the nails that hold the board in the middle. Install cleats. Put flashing over decaying joists. Flatten the nail tip or pre-drill screw holes.
How much does it cost to replace composite deck boards?
Replacing the wood on your deck with composite material will cost you between $15 to $25 per square foot. There may be other factors that can add to the replacement cost, such as the type of composite you choose, the shape of the deck, the amount of labor required, and the time of year.
Can you put new deck boards over old?
Yes, you can place any decking over an existing wood decking, even composites. When placing materials over existing decking, the latter can directly affect the former. In the case of wooden decking, if the existing floors are old and rotting, the new materials on top will have their lifespan reduced.
How do you repair a rotting deck?
When it is caught early, it may be possible to repair the damage without having to replace your whole deck. Remove any rotted boards and replace them with new, pressure-treated ones. Apply a water-resistant coating over the entire deck, including the support pieces. Even out any spots that create water pooling.
How much would a 16×16 deck cost?
16×16-foot Raised Deck: You can buy the materials for a 16×16-foot (256 square foot) deck using composite decking materials for about $5,600-$9,800 and build it yourself. A contractor would charge closer to $7,800-$15,700 to construct a deck of this kind.
How much does it cost to replace wood deck with Trex?
Trex Decking Cost Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation. Size is the biggest price factor, with 144 square feet ranging from $1,440 to $3,900 compared to $3,000 to $8,100 for 300 square feet.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
Why are my deck boards rotting?
Moisture and pooling water on decks can lead to rot and decay. Because dry rot is a fungus, it can spread like a cancer throughout a deck. Dry rot is caused by microorganisms that eat the cellulose from the wood leaving it brittle.
How long do deck boards last?
Traditional wood deck: Typically 10 to 15 years. Capped composite: Industry experts agree these boards can last 25 to 30+ years. Capped polymer (the best of the best): Because of its superior material composition, capped polymer boards can last much longer, potentially 50 years or more.
How much does labor cost for a deck?
Labor Cost to Build a Deck. Labor makes up about half of the cost with most pros charging from $15 to $35 per square foot. For an average 300 to 400 square foot deck, you’ll pay roughly $4,500 to $14,000 for labor alone.
How much does a 400 sq ft deck cost?
Surprisingly, this is a reasonably priced construction project, with average costs of building a deck ranging from $5,000-8,000 for a 250 to 400 sq. ft. deck. Most popular decking materials include Composites (Trex), pressure treated lumber, as well as natural wood, such as: cedar, bamboo, or pine.
Does a deck add value to a home?
Here’s a good one: many homeowners recoup a significant amount of the money they invest in their deck because the deck adds to the resale value of their home. In fact, a survey from Home Remodeling magazine found that composite decks return about 74% of their original cost and wood decks return about 87%, on average.
