Table of Contents
Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.
Should I resurface or replace my asphalt driveway?
While resurfacing is a great option for your driveway, it’s not always the best measure. After about 15 years your driveway will naturally lose its structural value. If your driveway is this old, our experts recommend completely replacing the asphalt.
How long does it take to replace an asphalt driveway?
Once the site is prepared, most driveways can be installed within two days, and the majority take just a single day.
Can you put a new asphalt driveway over an old one?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
What is the cheapest option for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
How can I make my asphalt driveway look better?
How to Make an Old Asphalt Driveway Look Good Clearing Weeds. Pull or use weed killer on sprouting weeds and invasive grass to remove them from the edges or inside of cracks. Fill in Cracks. Cracks form in the asphalt from settling or from hot and cold expansion. Fill in Holes and Chips. Seal the Driveway.
What time of year is best to pave a driveway?
The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It’s possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn’t likely to bring about the best results possible.
Are there different grades of asphalt for driveways?
There are two different types of asphalt that are used for driveways. There is a 41A, also known as a driveway mix, and there is a 41b type. There is a big difference in the two types of asphalt.
What type of asphalt is best for driveways?
Hot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.
What can I do with an old asphalt driveway?
Drop the asphalt pieces off at your community recycling area, a local asphalt manufacturer or an asphalt recycler. Bring your old driveway to your town’s landfill if you can’t find another place to take it. Large materials like asphalt take up a lot of room in landfills, so try to recycle if you can.
How thick is an asphalt overlay?
The amount of asphalt overlay applied to the surface will vary depending on the thickness of the existing surface, but typically will be within 1.5″ to 2″ thick.
What does it mean to cap a driveway?
Driveway overlays, or capping as it’s sometimes called, is a great way to save money vs removing and replacing your existing driveway.
Which is cheaper concrete or asphalt?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
What is the most hard wearing driveway?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
What is the most durable driveway?
Concrete is perhaps the most durable and versatile driveway options. Concrete provides a smooth, stable and secure foundation that holds up well in most climate and requires minimal maintenance.
Should you edge an asphalt driveway?
Why is Asphalt Edging Important? Edging is essential because it serves two primary purposes. First, the grading of the driveway exists to take pressure away from the asphalt. Without grading, your driveway edges would start to crack from the weight of vehicles driving over them.
Can you pave over cracked asphalt?
An overlay can be appropriate if there are small issues like minor surface cracks, minor water damage, or if it’s uneven. The choice depends on the condition of the existing pavement. Making the wrong choice could lead to more costly repairs.
What causes asphalt to crumble?
Fuel and oil can quickly deteriorate your asphalt pavement surface. In addition, over time the fuel and oil begin to penetrate the surface and can break up the aggregates of the asphalt. Eventually, the surface may begin to crumble and you may see some depressions begin to form.
Will rain ruin new asphalt?
In general, asphalt cannot be installed when it is raining. When rain comes into contact with fresh asphalt, it causes the oil to rise to the surface which can affect the curing time and the finished product. If asphalt is paved while it’s raining, it can reduce the overall quality of the asphalt.
Can it be too hot to lay asphalt?
Ideally you want to install asphalt when both ground and air temperature are anywhere between 50 and 90 degrees. Anything below 50 or above 90 can cause a poor pour that will give you issues down the road.
How cold is too cold for asphalt?
During initial application, the asphalt should still be at least 220 to 290-degrees Fahrenheit. If the asphalt dips below approximately 185-degrees Fahrenheit before compaction is complete, its consistency stiffens up too much to finish the job properly.
