Table of Contents
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.
Is it difficult to relocate a toilet?
Moving a toilet is not so much about moving the actual fixture—in fact, installing a toilet is a simple job that takes less than an hour—as it is about moving the drainage and the water supply plumbing to the new location. Once all of the plumbing is in place, installing the toilet is a relatively easy task.
Is it a big deal to move a toilet location?
Moving a toilet is not a straightforward weekend DIY job, but it is very doable when you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.
How much does it cost to move a toilet a few inches?
If you are looking to change your toilet location, you can expect to spend anywhere between $2500 and $3500 in normal circumstances. In case your renovation project requires you to change the vent line and the water supply, you will need to spend somewhere between $1500 and $2500 extra.
How do you relocate a toilet?
How to Move a Toilet in 8 Simple Steps Make a plan. Make space for the toilet before you move it. Turn off the water. Remove remaining water. Disconnect the supply line from the toilet. Remove the bolts. Remove and move the tank. Remove and move the toilet bowl. Clean and plug the drain hole.
Is it expensive to move a toilet UK?
Plumbing Relocation Cost Moving plumbing fixtures for a bathroom will likely cost you between £700 and £900. This may involve rerouting plumbing pipes to adapt for a new bath, sink, or toilet.
Can you switch a toilet and shower?
The simple answer is yes, you can put a toilet where a shower was, but the move doesn’t come without its issues. This isn’t a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.
How much does it cost to move a toilet Australia?
How much does it cost to move or relocate a toilet Australia? Every property in Australia is unique so the cost to move a toilet can vary from $100 to many $1,000’s depending on the property type & layout.
Can you put a toilet anywhere in your house?
On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. In the past, many homeowners have had the idea of their dream bathroom crushed because the location was simply too far away from the main drain.
Is moving plumbing expensive?
On average, it costs somewhere between $500-$1,000 to move a plumbing fixture around three feet or more. This varies, of course, depending on if your plumber needs to move anything around to connect to your drain, vent, or water lines.
How much does a plumber charge to replace a toilet UK?
The average toilet installation hourly rate for a plumber to carry out the work is around £40 to £60 per hour. If it’s a big job you might be charged a day rate, which is usually in the region of £320 to £480 per day.
How much does it cost to remove a bathroom UK?
Installing a new bathroom (including materials) will cost between £1,500 – £7,500, with the average price being £4,500.How much does a new bathroom cost in the UK? Task Estimate Suite £1,000 Removal of old suite and waste £300 – £500.
Where is toilet drain located?
The standard placement for a toilet drain in the bathroom is 12 inches from the wall behind the toilet. The 12-inch measurement runs from the wall itself to the dead center of the drain.
Can I change bathroom layout?
The good news is, in most cases, it’s perfectly possible. How easy is it to move plumbing around? It might feel daunting to those of us who aren’t plumbers, but, in most instances, it’s quite possible to move pipework and fittings around, so don’t assume the positions of your bath, toilet and basin are set in stone.
Can you switch a toilet and sink?
Ultimately, you can move your sink, tub, and toilet in a bathroom renovation, but doing so will require a reworking of your plumbing and electrical systems, and that will be an added cost to the project. That cost comes on top of the expenses of demolition, installing flooring, putting up drywall, and so on.
How much do plumbers charge per hour in Australia?
What can be said is that, on average, the hourly plumbing service across Australia is between $70 – $90. The average fixed rate fee for a typical service is around $150 – $180. The services are not cheap, but they are certainly a necessity!Average Hourly Rates Per Region. Region Average hourly Rate South Australia $85.
How much does a small bathroom renovation cost?
The national average to remodel a small bathroom is typically $6,500, but it can range anywhere from $1,500 up to $15,000 or more. For a complete remodel, you will likely pay $70 per square foot for low-end fixtures with DIY labor, and up to $250 per square foot for high-end fixtures installed by a licensed contractor.
How much should a bathroom renovation cost?
Estimating Bathroom Remodel Costs. Bathroom remodel costs run anywhere from $2,500 to $25,000. Large master baths in luxury homes might even hit or exceed $50,000. The typical homeowner will spend between $6,000 and $15,000 for a complete tear out and replacement of all walls, fixtures and appliances.
How do you move a 6 inch toilet?
To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
Can you put a standard toilet in a corner?
Just like regular toilets, most corner toilets have a 12″ rough-in. Use a straight edge to mark two perpendicular lines running from the marks you created in the previous step. Depending on whether you have extra tiling on the bathroom wall, you may need to move the flange before installing your corner toilet.
How much does it cost to move a toilet a foot?
Move a toilet drain plumbing: national average cost cost to move a toilet drain plumbing National Avg. Materials Cost per line $164.13 National Avg. Cost (labor and materials) for 1 line $746.11 National Cost Range (labor and materials) for 1 line $670.85 – $821.36.
Can a toilet waste pipe be moved?
There is usually a vertical waste water pipe under the toilet that uses gravity to move wastewater away. For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.
Can toilet waste pipe run under floor?
With the location of the soil-pipe that manages toilet waste at the other end of the house, the answer is definitely no, this is definitely not a cost-effective option. They can be mounted on the floor, but usually pipes run below the floor in-between the floor joists.
How much does it cost to move a half bathroom?
Converting a half bath to a full bath costs $5,000 to $25,000, depending of if you’re using existing space, adding space and the difficulty of installing new drain lines.
How do I rearrange my bathroom?
That being said, here are 6 simple suggestions to improve your bathroom layout, without the hassle and the expense of moving your plumbing. Replace the existing bathroom door. Resize your vanity. Float your fixtures. Divide the space. Switch the tub for a shower. Keep the tub AND add a luxurious accessible shower.
