Table of Contents
The cost to level a yard is $500 to $5,000 on average, depending on the project size and type, slope, and site conditions. Leveling a small area for a patio or pool costs $500 to $1,000. Leveling an entire backyard to flatten a slope costs $1,000 to $5,000.
How much does it cost to level a slope?
Leveling a slope costs between $1 and $15 per cubic yard of dirt. Basic lawn re-sloping to prevent erosion and fix drainage averages at $1,900 for most homeowners.
Can you level out a sloped yard?
Sloped ground in your backyard may cause water runoff, soil erosion, uneven moisture retention and difficulty when mowing your grass or tilling your flowerbeds. Leveling the yard to decrease the slope will remedy many of these problems, allowing your backyard to become an inviting space.
How do you flatten a sloped yard?
How to Level a Yard: 9 Easy Steps Step 1: First Seek Permission. Step 3: Grade. Step 4: Measure the Rise and Run of your Land. Step 5: Calculate and Mark the number of Terraces. Step 6: Water the Ground. Step 7: Build Retaining Wall(s) Step 8: Fill with Sand. Make it Compact. Step 9: Plant New Grass Seed or Sod.
How do you fix a sloped backyard?
You can make a sloping property more functional by cutting away a portion of a hill and installing a retaining wall to hold back the soil. This is a great opportunity to create a dedicated planting area behind and along the retaining wall, while reclaiming a portion of your yard for an expanse of grass on level ground.
What equipment is needed to level a yard?
Basic equipment needed to level your lawn is pretty simple: a hand rake, landscape rake, plastic leaf rake, a large push broom, a shovel, an edger, and a wheelbarrow. Additionally, the tool I use is a leveling rake, like the Accuform AccuLevel by Par Aide or a similar one on Amazon.
How do you level a very uneven lawn?
Levelling Shallow Areas Put a thin layer over the problem area and spread it across evenly. Push the soil down to compact it with your feet or a flat side of a rake. Water the soil a little and leave it to settle. After a few days you can then add grass seed and another light layer of topsoil.
How do you level an uneven backyard?
Use these 8 steps for how to level a yard to ensure great results. STEP 1: Mow Your Lawn. STEP 2: Dethatch Your Lawn [As Needed] STEP 3: Dig up the grass in the sunken area of the lawn. STEP 4: Make Soil Mix: Topsoil, Sand and Compost. STEP 5: Fill Sunken Areas and Holes with Soil Mixture. STEP 6: Even Out the Entire Lawn.
How much dirt do I need to level my yard?
Calculate How Much Soil You Need Convert the inches you need for soil depth into feet. Example: 3″ of soil (3″ ÷ 12″=.25′) Multiply the length by the width by the depth of soil needed. Divide the cubic feet by 27 (that’s the number of cubic feet in one cubic yard). Round off your answer to 1.4 cubic yards.
How do you add elevation to a flat yard?
Try a Sunken Patio. Instead of building up, consider digging down to add level changes to a flat lot. Stack Raised Beds. Add Berms. Go Vertical. Suggest a Stream Bed. Invest in Built-In Planters. Add Boulders. Play With Landforms.
When should I level my lawn?
Grass has a hard time growing through fill deeper than 2 inches. Since we want the grass to rapidly grow through the fill, filling should only be done when the grass is in active growth and before the cool weather of fall. Ideally, apply fill to lawns from April to September.
Can I use a tiller to level my yard?
Tillers are ideal to use when leveling a large area of your yard. These machines are effective when you need to prepare the soil for planting.
How do you level ground professionally?
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
How much sand is needed to level a yard?
A drag (see above) behind a lawn mower works great for larger areas. Either way you need a long flat surface to help level up the ground with the sand and break up the core plugs. The idea is to add about a ¼ inch of sand and work it evenly. It will fall into the holes.
How do I level my existing lawn?
STEP 1: Mow the lawn. STEP 2: Examine the amount of thatch at the lawn’s roots, then dethatch as needed. STEP 3: Mix sand, topsoil, and compost. STEP 4: Dig up the grass in sunken parts of the lawn and fill with the soil mixture. STEP 5: Spread the rest of the soil mixture in a thin layer to even out the entire lawn.
How do you grade a sloped yard?
The first rule of grading is that the ground should slope away from your house in all directions dropping at least two or three inches every ten feet. The maximum slope in a lawn should be twelve inches for every four feet.
