Table of Contents
A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
What is the labor cost to install pavers?
For the labor to install pavers alone, be prepared to pay approximately $50 to $80 per hour, which translates to around $4 to $11 per square foot. For example, it should take about 35 to 40 hours to completely build and install a 300-square foot paver patio.
Is it cheaper to lay concrete or pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
How much does a 20×20 paver patio cost?
A 20×20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot.
How much does a 20×20 patio cost?
How Much Does a 20×20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from $1,900 to $6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs.
How much does a 12×12 paver patio cost?
Average Cost to Install Brick Paver Patio by Size Dimensions Total Square Feet Cost Range 10×10 100 $800 – $2,500 12×12 144 $1,150 – $3,600 12×16 192 $1,550 – $4,800 16×16 256* $2,050 – $6,400.
Are pavers worth the money?
Pavers have a higher resale value because of their beauty and versatility. Concrete slabs are generally more common, but over time, pavers will net you more value because concrete is expensive to replace.
Do pavers add value to your home?
The truth is that pavers can add value to your home. However, if you are using pavers as part of creating a brand new garden space, you could improve your home’s value by as much as 20 percent.
How much does a 200 square foot paver patio cost?
Cost Estimator by Size PATIO SIZE AVERAGE COST ($11.34 per square foot) TYPICAL PRICE RANGE ($8.69 to $22.18 per square foot) 100 square feet $1,134 $869 to $2,218 150 square feet $1,701 $1,304 to $3,327 200 square feet $2,268 $1,738 to $4,436 250 square feet $2,835 $2,173 to $5,545.
How do you estimate pavers?
To determine how many paver stones you need: Multiply the length and width (in feet) of the area you’re paving. Multiply the length and width (in inches) of your bricks or paving stones. Divide the brick or paver’s surface area by 144 to convert to square feet. Divide the total paving area by the paver’s surface area.
How do I estimate a patio?
Gravel is often the most cost-effective choice for a patio at an average of $5 – $7 per square foot to install. A concrete patio typically costs between $6 – $16 per square foot. A paver patio usually runs $8 – $20 per square foot to install. A brick patio runs $10 – $50 per square foot to install on average.
What do you put under a paver patio?
The Interlocking Concrete Pavement Institute recommends washed concrete sand as the best base sand for pavers. Concrete sand, also known as bedding sand, is coarse and doesn’t trap excess moisture beneath the paver surface.
How much does patio stone cost?
The average cost to install a stone patio ranges from about $3,900 to $15,000 for a 300 square foot area.Average Cost to Install a Stone Patio. Type Material Cost Total Cost Marble $7-$20 $15-$35 Slate $10-$30 $18-$45 Granite $10-$35 $18-$50.
Is a deck or patio more expensive?
Patios are generally less expensive than decks, but the ROI on a new deck addition runs greater than one on a patio. However, both additions can offer a great experience depending on what you’re looking for.
Are larger or smaller pavers better?
Smaller pavers create a more flexible surface which is less prone to damage caused by the movement of the ground beneath it. Smaller pavers also have a generally higher load-bearing capacity.
How long does it take to install pavers?
Laying pavers is a DIY project that takes about one weekend to complete. When you’re building a patio, you’ll make layers using these materials: A 6-inch layer of gravel for the paver base.
What is the cheapest patio paver?
What is the cheapest patio paver? Gravel is the cheapest patio paver material out there costing $6-10 per square foot and can be done DIY. But when it comes to the cheapest patio paver, it would be brick pavers or technically called thin concrete pavers. They cost from $2.50-5 per square foot.
How do I stop my pavers from sinking?
Compacting causes the stones to form a tight bond with the bedding layer, which reduces the chance of your pavers sinking again. Sweep joint sand into the joints between the pavers. Do this by pouring a pile of sand on your hardscape and sweep it over the stones until your joints can’t hold any more sand.
What lasts longer concrete or pavers?
Pavers can last up to 50 years, in part because individual tiles are easy to replace with minimal dint to the wallet. Slab and stamped concrete can last as long as 25 years.
How deep do you have to dig for a paver patio?
Paver base depth is determined by the type of stones used and the type of sand or gravel that will be laid under them. Paver thickness is generally about 3- to 3 1/2-inches. Therefore, you need to dig a paver patio base depth of about 9 inches (22.86 cm) to accommodate any kind of paver.
Is a paver patio a good investment?
When homeowners invest in a paver patio, they can expect extreme durability, minimal maintenance and — you guessed it — added value to their home. According to Inman, a leading real estate news source, patio additions to homes (when done properly) can deliver a return on investment of anywhere between 30% to 60%.
